#define LED_PIN 3

int ledTeller;


void setup() {
  Serial.begin(115200);
  pinMode(LED_PIN, OUTPUT);
  ledTeller = 0;

  /* initialisatie procedure
    1. serial connectie 115200 baud
    2. pin LED_PIN is output
    3. ledTeller = 0*/

}

void loop() {
  // put your main code here, to run repeatedly:
  digitalWrite(LED_PIN, HIGH);
  Serial.print("LED_PIN aan "); Serial.println(ledTeller);
  delay(150);
  digitalWrite(LED_PIN, LOW);
  Serial.print("LED_PIN uit "); Serial.println(ledTeller);
  delay(200);
  if (ledTeller == 10)
  {
    ledTeller = 0;
  } else {
    ledTeller = ledTeller + 1;
  }
}