#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED display width, in pixels ANCHO
#define SCREEN_HEIGHT 64 // OLED display height, in pixels ALTO
#define OLED_RESET     -1 // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3d ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
Adafruit_SSD1306 displayq(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
#define SCREEN_ADDRESS2 0x3c ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
const int buttonPin = 4;
void setup() {
  Serial.begin(9600);

  // SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
  if(!displayq.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
    Serial.println(F("SSD1306 FALLO"));
    for(;;); // Don't proceed, loop forever
  }
  displayq.clearDisplay();
  displayq.setTextColor(WHITE);
  displayq.setCursor(0,0);
  displayq.println("Hola Mundo");
  displayq.display();
  if(!display.begin(SSD1306_I2C_ADDRESS, 0x3c)) {
    Serial.println(F("SSD1306 FALLO2"));
    for(;;); // Don't proceed, loop forever
  }
  display.clearDisplay();
  display.setTextColor(WHITE);
  display.setCursor(0,0);
  display.println("Hola Mundoeeee");
  display.display();
  /*
  display.clearDisplay();
  display.setTextSize(1);
  display.fillCircle(64,32,15,WHITE);
  
  display.setTextColor(WHITE);
  display.setCursor(0,0);
  display.println("Hola Mundo");
  display.display();*/
}
 void loop(){
  /*bool button = digitalRead(buttonPin);
  int x = analogRead(A0);
  int y = analogRead(A1);
  movde(button, x, y);*/
  }
/*void movde(bool button, int x, int y){
  displayq.clearDisplay();
  displayq.setTextSize(1);
  /*  int x1 = map(x, 0, 1023, display.width() - 60 - 2, display.width() - 2);
  int y1 = map(y, 0, 1023, display.height() - 60 - 2, display.height() - 2);
  displayq.qdrawRect(display.width() - 60 - 2, display.height() - 60 - 2, 60, 60, WHITE);
  //display.setTextColor(WHITE);*/
  //displayq.fillCircle(x, y ,9,WHITE);
  /*display.setCursor(20,20);
  display.println("hola");
  display.println(x);
  display.println(y);
  display.display();*/
//}*/