/*************************************************************

  This is a simple demo of sending and receiving some data.
  Be sure to check out other examples!
 *************************************************************/

/* Fill-in information from Blynk Device Info here */
#define BLYNK_TEMPLATE_ID           "TMPL6cK7JWV_I"
#define BLYNK_TEMPLATE_NAME         "Quickstart Template"
#define BLYNK_AUTH_TOKEN            "1f-MdmF1S4YdwqrpPxoeRGACHAlRSq4W"

/* Comment this out to disable prints and save space */
#define BLYNK_PRINT Serial


#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "Wokwi-GUEST";
char pass[] = "";

BlynkTimer timer;

// This function is called every time the Virtual Pin 0 state changes
BLYNK_WRITE(V0)
{
  // Set incoming value from pin V0 to a variable
  int value = param.asInt();

  // Update state
  Blynk.virtualWrite(V1, value);
}

// This function is called every time the device is connected to the Blynk.Cloud
BLYNK_CONNECTED()
{
  // Change Web Link Button message to "Congratulations!"
  Blynk.setProperty(V3, "offImageUrl", "https://static-image.nyc3.cdn.digitaloceanspaces.com/general/fte/congratulations.png");
  Blynk.setProperty(V3, "onImageUrl",  "https://static-image.nyc3.cdn.digitaloceanspaces.com/general/fte/congratulations_pressed.png");
  Blynk.setProperty(V3, "url", "https://docs.blynk.io/en/getting-started/what-do-i-need-to-blynk/how-quickstart-device-was-made");
}

// This function sends Arduino's uptime every second to Virtual Pin 2.
void myTimerEvent()
{
  // You can send any value at any time.
  // Please don't send more that 10 values per second.
  Blynk.virtualWrite(V2, millis() / 1000);
}

void setup()
{
  // Debug console
  Serial.begin(115200);

  Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass);
  // You can also specify server:
  //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, "blynk.cloud", 80);
  //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, IPAddress(192,168,1,100), 8080);

  // Setup a function to be called every second
  timer.setInterval(1000L, myTimerEvent);
}

void loop()
{
  Blynk.run();
  timer.run();
  // You can inject your own code or combine it with other sketches.
  // Check other examples on how to communicate with Blynk. Remember
  // to avoid delay() function!
}







/*
#define BLYNK_TEMPLATE_ID "TMPL6HhYprbNk"
#define BLYNK_TEMPLATE_NAME "esp32"
#define BLYNK_AUTH_TOKEN "M12OeVPCJFlAkgvADC9a00o_WML4DDtA"

#define BLYNK_PRINT Serial
#include <DHT.h>//

#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>


char ssid[] = "Wokwi-GUEST";
char pass[] = "";

BlynkTimer timer;
DHT dht(25,DHT22);
int value;
int value1;
BLYNK_WRITE(V0)
{

  value = param.asInt();


  // Blynk.virtualWrite(V1, value);
}
BLYNK_WRITE(V1)
{

  value1 = param.asInt();


  // Blynk.virtualWrite(V1, value);
}
void setup()
{
  pinMode(2, OUTPUT);
  pinMode(4, OUTPUT);
  pinMode(13, INPUT_PULLUP);
  //pinMode(25, INPUT);
  Serial.begin(115200);


  Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass);

}

void loop()
{
  Blynk.run();
  //timer.run();
  //digitalWrite(2, value);


  digitalWrite(4, value1);
  int h = dht.readHumidity();
  Blynk.virtualWrite(V4, h);
  delay (1000);
  int t = dht.readTemperature();
  Blynk.virtualWrite(V3, t);
  delay (1000);

  int sw = digitalRead(13);
  delay(500);
  if (sw == 0) {
    digitalWrite(2, 1);
    Blynk.virtualWrite(V2, 1);
    delay(200);
  } else {
    digitalWrite(2, 0);
    Blynk.virtualWrite(V2, 0);
    delay(200);
  }
}                   */