#include <Wire.h>
#include <LiquidCrystal_I2C.h>

LiquidCrystal_I2C LCD = LiquidCrystal_I2C(0x27, 16, 2);

#include <DHT.h>
#define DHTPIN 15      // Pin connected to DHT22
#define DHTTYPE DHT22 // DHT sensor type
DHT dht(DHTPIN, DHTTYPE);
const char pinLedHijau = 4;
const char pinLedMerah = 2;
void setup(){
  Serial.begin(115200);
  dht.begin();
  LCD.init();
  LCD.backlight();
  LCD.setCursor(0, 0);  LCD.print("Temp: ");
  LCD.setCursor(0, 1);  LCD.print("Humd: ");
  pinMode(pinLedHijau, OUTPUT);
}
void loop(){

  /*
  float Temp = dht.readTemperature();
  float Humd = dht.readHumidity();
  if (isnan(Temp) || isnan(Humd) )
  {
    Serial.println("Gagal Baca Sensor");
  }
  Serial.print("Temperature = ");     Serial.print(Temp,1);
  Serial.print(" °C ; Humidity    = ");Serial.println(Humd,1);
  LCD.setCursor(6,0);
  LCD.print(Temp);
  delay(2000);
  */
digitalWrite(pinLedHijau, LOW);
  delay(500);
  digitalWrite(pinLedHijau, HIGH);
  delay(500);
  


}