#include <LiquidCrystal_I2C.h>
LiquidCrystal_I2C lcd (0x27, 16, 2); // GANTI 0x3F Ke 0x27 kalau LCD ga muncul
#include <DHT.h>
DHT dht (2, DHT11); //Pin, Jenis DHT

int powerPin = 3; // untuk pengganti VCC/SVOLT

void setup() {
  lcd.init();
  // Print a message to the LCD.
  lcd.backlight();
  //jadikan pin power sebagai output
  pinMode (powerPin, OUTPUT); // default bernilai LOW
  digitalWrite (powerPin, LOW);
 Serial.begin(9600);
 dht.begin();
}

void loop() {
 digitalWrite(powerPin, HIGH);

 float kelembaban dht.readHumidity();
 float suhu dht.readTemperature();
 
 Serial.print("kelembaban: ");
 Serial.print (kelembaban);
 Serial.print(" ");
 Serial.print("suhu: ");
  digitalWrite(powerPin, LOW);
 Serial.begin(9600);
dht.begin();
}

void loop() { 
 digitalWrite (powerPin, HIGH);

 float kelembaban = dht.readHumidity();
 float suhu dht.readTemperature();

 Serial.print("kelembaban: ");
 Serial.print(kelembaban);
 Serial.print(" ");
 Serial.print("suhu: ");
 Serial.println(suhu);

  lcd.clear();
  lcd.setCursor(0,0);
  lcd.print ("Kelembaban: ");
  1cd.setCursor(11,0);
  lcd.print (kelembaban);

  lcd.setCursor(0,1);
  lcd.print ("Suhu: ");
  lcd.setCursor (5,1);
  lcd.print (suhu);
  delay(1000);
}