#define BLYNK_TEMPLATE_ID "TMPL6gsr9-RJa"
#define BLYNK_TEMPLATE_NAME "esp82"
#define BLYNK_AUTH_TOKEN "oXAfwKy4lG015VT326WraBFGEj2GLtNL"

#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>


#include <DHT.h>

char auth[] = "oXAfwKy4lG015VT326WraBFGEj2GLtNL";
char ssid[] = "Wokwi-GUEST"; //nama hotspot yang digunakan
char pass[] = ""; //password hotspot yang digunakan

#define DHTPIN1 2
#define DHTPIN2 4          // Mention the digital pin where you connected 
#define LED1 5
#define LED2 18
#define LAMPU 13
int tombol;
#define DHTTYPE DHT22     // DHT 11  
DHT dht1(DHTPIN1, DHTTYPE);
DHT dht2(DHTPIN2, DHTTYPE);
BlynkTimer timer;



void setup(){
   Serial.begin(115200);
  Blynk.begin(auth, ssid, pass);

  pinMode(LED1, OUTPUT);
  pinMode(LED2, OUTPUT);
  pinMode(LAMPU, OUTPUT);
 
  // You can also specify server:
  //Blynk.begin(auth, ssid, pass, "blynk.cloud", 80);
  //Blynk.begin(auth, ssid, pass, IPAddress(192,168,1,100), 8080);
  
  dht1.begin();
  dht2.begin();
  timer.setInterval(2500L, sendSensor);
}

void loop(){
  Blynk.run();
  timer.run();
}

BLYNK_WRITE(V4) {
  tombol = param.asInt();
  if (tombol == 1) {
    digitalWrite(LAMPU, HIGH);
  } else {
    digitalWrite(LAMPU, LOW);
  }
}
void sendSensor(){
  float h1 = dht1.readHumidity();
  float t1 = dht1.readTemperature(); // or dht.readTemperature(true) for Fahrenheit
  if (isnan(h1) || isnan(t1)) {
    Serial.println("Failed to read from DHT sensor!");
    return;
  }
  float h2 = dht2.readHumidity();
  float t2 = dht2.readTemperature(); // or dht.readTemperature(true) for Fahrenheit
  if (isnan(h2) || isnan(t2)) {
    Serial.println("Failed to read from DHT sensor!");
    return;
  }

  Blynk.virtualWrite(V1, h1);
  Blynk.virtualWrite(V0, t1);
  Blynk.virtualWrite(V3, h2);
  Blynk.virtualWrite(V2, t2);
  Serial.print("Temperature 1 : ");
  Serial.print(t1);
  Serial.print("    Humidity 1: ");
  Serial.println(h1);
   Serial.print("Temperature 2: ");
  Serial.print(t2);
  Serial.print("    Humidity 2: ");
  Serial.println(h2);

  if(h1>30){ //jika suhu diatas 30 derajat, maka LED akan menyala
digitalWrite(LED1, HIGH);
  }else if(h1<30){ //jika suhu dibawah 30 derajat, maka LED tidak akan menyala
digitalWrite(LED1, LOW);

  }
if(t1>30){ //jika kelembapan diatas 30%, maka LED akan menyala
digitalWrite(LED1, HIGH);
}else if(t1<30){ //jika kelembapan dibawah 30%, maka LED tidak akan meyala
digitalWrite(LED1, LOW);
}

if(h2>30){ //jika suhu diatas 30 derajat, maka LED akan menyala
digitalWrite(LED2, HIGH);
  }else if(h2<30){ //jika suhu dibawah 30 derajat, maka LED tidak akan menyala
digitalWrite(LED2, LOW);
  }
if(t2>30){ //jika kelembapan diatas 30%, maka LED akan menyala
digitalWrite(LED2, HIGH);
}else if(t2<30){ //jika kelembapan dibawah 30%, maka LED tidak akan meyala
digitalWrite(LED2, LOW);
}
}