from machine import Pin
import utime

trigger = Pin(27, Pin.OUT)
echo = Pin(26, Pin.IN)

# Define water level thresholds
WATER_LEVEL_LOW = 100  # Adjust this value based on your setup
WATER_LEVEL_HIGH = 400  # Adjust this value based on your setup

# Define buzzer pin and configure it as an output
buzzer_pin = Pin(6, Pin.OUT)

def ultra():
    trigger.low()
    utime.sleep_us(2)
    trigger.high()
    utime.sleep_us(5)
    trigger.low()
    while echo.value() == 0:
        signaloff = utime.ticks_us()
    while echo.value() == 1:
        signalon = utime.ticks_us()
    timepassed = signalon - signaloff
    distance = (timepassed * 0.0343) / 2
    return distance

def activate_buzzer():
    # Function to activate the buzzer
    buzzer_pin.on()
    utime.sleep(1)  # Buzzer on for 1 second
    buzzer_pin.off()

def check_water_level():
    distance = ultra()
    print("\nThe distance measured is", distance, "cm")

    # Check the water level
    if distance < WATER_LEVEL_LOW:
        print("\nVery low water level, Please check.")
        activate_buzzer()  # Activate the buzzer when water level is low

    elif distance > WATER_LEVEL_HIGH:
        print("\nToo high water level. Please check.")
        activate_buzzer()  # Activate the buzzer when water level is high

    else:
        print("\nThe water levels are NORMAL.")

while True:
    check_water_level()
    utime.sleep(1)