#define BLYNK_TEMPLATE_ID "TMPL32kpBLmGm"
#define BLYNK_TEMPLATE_NAME "Vibration Analysis"
#define BLYNK_AUTH_TOKEN "qRjbAB_SWFTet_KdP5F33OJuGFVg39hO"


#include <Adafruit_MPU6050.h>
#include <Adafruit_Sensor.h>

#include <Adafruit_SSD1306.h>
#include <Wire.h>

#define SCREEN_WIDTH 128
#define SCREEN_HEIGHT 64
#define RESET  -1

Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, RESET);

// Comment this out to disable prints and save space
#define BLYNK_PRINT Serial


#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>

char auth[] = BLYNK_AUTH_TOKEN;

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "Wokwi-GUEST";
char pass[] = "";

BlynkTimer timer;

// #include <LiquidCrystal_I2C.h>
// #define I2C_ADDR 0x27
// #define LCD_COLUMNS 20
// #define LCD_LINES 4



Adafruit_MPU6050 m_p_u;
// LiquidCrystal_I2C lcd(I2C_ADDR, LCD_COLUMNS, LCD_LINES);

#define xInt    V1
#define yInt    V2
#define zInt    V3

BLYNK_CONNECTED() {
  Blynk.syncVirtual(xInt);
  Blynk.syncVirtual(yInt);
  Blynk.syncVirtual(zInt);
}



void setup() {
  Serial.begin(115200);
  // lcd.init();
  // lcd.backlight();
  if (!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) {
    Serial.print("couldn't initialize screen");
    for (;;);
  }

  display.display();
  delay(2000); // Pause for 2 seconds
  // Clear the buffer
  display.clearDisplay();
  delay(1000); // Pause for 2 seconds
  displayInitilize();
  delay(2000); // Pause for 2 seconds



  while (!Serial)
    delay(20);

  if (!m_p_u.begin()) {
    while (1) {
      delay(20);

    }
  }
  Blynk.begin(auth, ssid, pass);
}


void loop() {
  Blynk.run();
  timer.run();
  // You can inject your own code or combine it with other sketches.
  // Check other examples on how to communicate with Blynk. Remember
  // to avoid delay() function!


  sensors_event_t acc, gcc, temp;
  m_p_u.getEvent(&acc, &gcc, &temp);
  Serial.print("Acceleration on x-axis");
  Serial.println(acc.acceleration.x);
  Serial.print("Acceleration on y-axis");
  Serial.println(acc.acceleration.y);
  Serial.print("Acceleration on z-axis");
  Serial.println(acc.acceleration.z);
  Serial.println("---------------------");

  //---------------------------------------------
  Blynk.virtualWrite(xInt, acc.acceleration.x);
  Blynk.virtualWrite(yInt, acc.acceleration.y);
  Blynk.virtualWrite(zInt, acc.acceleration.z);
  //---------------------------------------------


  // lcd.setCursor(0, 0);
  // lcd.print("__x__|__y__|__z__");
  // lcd.setCursor(0, 1);
  // lcd.print(String(acc.acceleration.x) + "|" + String(acc.acceleration.y) + "|" + String(acc.acceleration.z) + "|");
  // lcd.print("____");

  display.clearDisplay();
  display.setCursor(0, 0);
  display.setTextSize(2);
  display.setTextColor(SSD1306_WHITE);
  display.println("_x_|_y_|_z_");
  display.println(String(acc.acceleration.x) + "|" + String(acc.acceleration.y) + "|" + String(acc.acceleration.z) + "|");
  display.display();


  delay(50);

}

void displayInitilize() {
  display.clearDisplay();
  display.setCursor(0, 0);
  display.setTextSize(2);
  display.setTextColor(SSD1306_WHITE);
  display.println("Initializing.....");
  display.display();
  delay(2000);
  display.clearDisplay();
  display.println("Connected!!");
  display.display();
  delay(2000);
  display.clearDisplay();

}

void displayData(){
  
 
}