#include <TM1637.h>

#define inDelkaOsvit        A0   //delka osvitu
#define inTlacReset         A2   //A2   tlacitko
#define inTlacStart         A1   //A1   tlacitko
#define modraLED            2    //D2  LED dioda
#define cervenaLED          4    //D4  LED dioda
//#define blikaLED            6    //D6  LED dioda

TM1637 TM1;       // Each display needs its own object

#define SECS_PER_MIN  (60UL)
#define numberOfSeconds(_time_) (_time_ % SECS_PER_MIN)  
#define numberOfMinutes(_time_) ((_time_ / SECS_PER_MIN) % SECS_PER_MIN) 

//secondsOsvit %= 60;  // celociselny zbytek po deleni (72%60 = 12)

int delkaOsvitVal = 0;
int delkaOsvitMin = 0;

boolean tlacStart = false;
boolean tlacReset = false;
//boolean ledBlikat = false;
boolean zobrazNula = false;
bool colon = true;         // for a toggling of the colon in the middle.

unsigned long delkaOsvitMillis;
unsigned long startMillis;
unsigned long currentMillis;
unsigned long currentRozdilMillis;

long delkaIntervalMls;

void setup() {
  Serial.begin(9600);
  pinMode(modraLED, OUTPUT);
  pinMode(cervenaLED, OUTPUT);
  //pinMode(blikaLED, OUTPUT);
  pinMode(inTlacStart,INPUT);
  pinMode(inTlacReset,INPUT);

  digitalWrite(modraLED, LOW);
  //digitalWrite(blikaLED, LOW);
  
  // initialize the LCD
  TM1.begin(6, 8, 4);       //  clockpin, datapin, #digits
  TM1.displayClear();
  TM1.setBrightness(7);     // full brightness, default is 3
  zobrazHodnoty(0,0);

  delay(2000); 
  digitalWrite(cervenaLED, HIGH);

  delkaOsvitVal = analogRead(inDelkaOsvit);  
  //delkaOsvitMillis = map(delkaOsvitVal, 0, 1023, 360000, 1200000);
}

void loop() {
  //Serial.print(delkaOsvitVal);
  //Serial.print("   Delka min: ");
  //Serial.println(delkaOsvitMillis);

  // zmacknuto tlacitko Start
  if (digitalRead(inTlacStart) == 1 && tlacStart == false) {
    tlacStart = true;
    tlacReset = false;
    //ledBlikat = false;
    digitalWrite(cervenaLED, LOW);
    digitalWrite(modraLED, HIGH);
    //digitalWrite(blikaLED, LOW);
    startMillis = millis();
        
  }
  
  // zmacknuto tlacitko Reset
  if (digitalRead(inTlacReset) == 1 && tlacReset == false) {
    tlacReset = true;
    tlacStart = false;
    //ledBlikat = false;
    zobrazNula = false;
    digitalWrite(cervenaLED, HIGH);
    digitalWrite(modraLED, LOW);
    //digitalWrite(blikaLED, LOW);
  }

  //if (ledBlikat) {
  //  digitalWrite(blikaLED, (millis() / 1000) % 2);
  //}


  if (tlacStart) {  
    currentMillis = millis();
    currentRozdilMillis = (currentMillis - startMillis);

    if (currentRozdilMillis >= delkaOsvitMillis) {
      tlacStart = false;
      digitalWrite(cervenaLED, HIGH);
      digitalWrite(modraLED, LOW);
      //digitalWrite(blikaLED, HIGH);
      //ledBlikat = true;
      zobrazNula = true;
      zobrazHodnoty(delkaOsvitMillis/1000,0);
    }

    zobrazHodnoty(delkaOsvitMillis/1000,(delkaOsvitMillis-currentRozdilMillis)/1000);

  } else {
    delkaOsvitVal = analogRead(inDelkaOsvit);  
    delkaOsvitMillis = map(delkaOsvitVal, 0, 1023, 360000, 1200000);

    if (zobrazNula) {
       zobrazHodnoty(delkaOsvitMillis/1000,0);
    } else {
      zobrazHodnoty(delkaOsvitMillis/1000,delkaOsvitMillis/1000);
    }
  }
  
}

String getTimeStr(int seconds, int minutes) {
  String minut;
  String sec;

  if(minutes < 10) {
    minut = String("0") + String(minutes);
  } else {
    minut = String(minutes);
  }

  if(seconds < 10) {
    sec = String("0") + String(seconds);
  } else {
    sec = String(seconds);
  }

  return String(minut) + String(":") + sec;
}

void zobrazHodnoty(long nastaveno, long odpocet) {
  //delay(500);
  int minutesN = numberOfMinutes(nastaveno);
  int secondsN = numberOfSeconds(nastaveno);

  String casNastaven = getTimeStr(secondsN,minutesN);

  int minutesO = numberOfMinutes(odpocet);
  int secondsO = numberOfSeconds(odpocet);

  String casOdpocet = getTimeStr(secondsO,minutesO);

  TM1.displayTime(minutesO,secondsO, colon); // display the numbers

/*
  lcd.setCursor(0, 0);
  lcd.print("NAST. CAS:");
  lcd.setCursor(11, 0);
  lcd.print("      ");
  lcd.setCursor(11, 0);
  lcd.print(casNastaven);
    
  lcd.setCursor(0, 1);
  lcd.print("SKUT. CAS:");
  lcd.setCursor(11, 1);
  lcd.print("      ");
  lcd.setCursor(11, 1);
  lcd.print(casOdpocet);
  */
  
}