//Actividad 2: Programación del display de 7 Segmentos: Crear un dado electrónico*/
//realizado por Chistian Benavides
//Display de 7 segmentos con pulsador ESP32

int a = 22; //Ping segmento a
int b = 2; //Ping segmento b
int c = 3; //Ping segmento c
int d = 4; //Ping segmento d
int e = 5; //Ping segmento e
int f = 15;//Ping segmento f
int g = 16; //Ping segmento g
int Segmento = 0;
int Retardo = 50;
int Pulsador = 19;//Se declara PIN 19 de pulsador

void setup() {
  
Serial.begin(115200);

pinMode(a, OUTPUT);
pinMode(b, OUTPUT);
pinMode(c, OUTPUT);
pinMode(d, OUTPUT);
pinMode(e, OUTPUT);
pinMode(f, OUTPUT);
pinMode(g, OUTPUT);
pinMode(Segmento, OUTPUT); //Declaro el segmento de display como salida 
pinMode(Pulsador, INPUT); //Declaro el pulsador como entrada
}

void loop() {

if (digitalRead(Pulsador) == HIGH){ 
 Segmento = Segmento + 1; //Incremento +1
 delay(Retardo);
}
  switch (Segmento){
      
    case 1:
      digitalWrite(a, HIGH);
      digitalWrite(b, LOW);
      digitalWrite(c, LOW);
      digitalWrite(d, HIGH);
      digitalWrite(e, HIGH);
      digitalWrite(f, HIGH);
      digitalWrite(g, HIGH);
    break;
  
    case 2: 
      digitalWrite(a, LOW);
      digitalWrite(b, LOW);
      digitalWrite(c, HIGH);
      digitalWrite(d, LOW);
      digitalWrite(e, LOW);
      digitalWrite(f, HIGH);
      digitalWrite(g, LOW);
    break;
  
    case 3:
      digitalWrite(a, LOW); 
      digitalWrite(b, LOW);
      digitalWrite(c, LOW);
      digitalWrite(d, LOW);
      digitalWrite(e, HIGH);
      digitalWrite(f, HIGH);
      digitalWrite(g, LOW);
    break;
  
    case 4:
      digitalWrite(a, HIGH);
      digitalWrite(b, LOW);
      digitalWrite(c, LOW);
      digitalWrite(d, HIGH);
      digitalWrite(e, HIGH);
      digitalWrite(f, LOW);
      digitalWrite(g, LOW);
    break;
  
    case 5:
      digitalWrite(a, LOW);
      digitalWrite(b, HIGH);
      digitalWrite(c, LOW);
      digitalWrite(d, LOW);
      digitalWrite(e, HIGH);
      digitalWrite(f, LOW);
      digitalWrite(g, LOW);
    break;
  
    case 6:
      digitalWrite(a, LOW);
      digitalWrite(b, HIGH);
      digitalWrite(c, LOW);
      digitalWrite(d, LOW);
      digitalWrite(e, LOW);
      digitalWrite(f, LOW);
      digitalWrite(g, LOW);
    break;
  
   
    break;
    default:
     Segmento = -1; //Delimitador -1
    break;
  }
  
}