//igor m.Raichel


#include <Arduino.h>

#define LED_RED_PIN 26
#define LED_GREEN_PIN 27
#define LED_BLUE_PIN 14

void setup() {
   Serial.begin(115200);
  Serial.println("Hello, ESP32!");
  pinMode(LED_RED_PIN, OUTPUT);
  pinMode(LED_GREEN_PIN, OUTPUT);
  pinMode(LED_BLUE_PIN, OUTPUT);
}

void loop() {
  // Set the colors to different intensity values
  analogWrite(LED_RED_PIN, 255); // Full intensity for red
  analogWrite(LED_GREEN_PIN, 0); // Off for green
  analogWrite(LED_BLUE_PIN, 0); // Off for blue
    Serial.println("red");
  delay(1000); // Wait for 1 second

  analogWrite(LED_RED_PIN, 0); // Off for red
  analogWrite(LED_GREEN_PIN, 255); // Full intensity for green
  analogWrite(LED_BLUE_PIN, 0); // Off for blue
    Serial.println("green");
  delay(1000); // Wait for 1 second

  analogWrite(LED_RED_PIN, 0); // Off for red
  analogWrite(LED_GREEN_PIN, 0); // Off for green
  analogWrite(LED_BLUE_PIN, 255); // Full intensity for blue
    Serial.println("blue");
  delay(1000); // Wait for 1 second
}