#define BLYNK_TEMPLATE_ID "TMPL6fylUwwo6"
#define BLYNK_TEMPLATE_NAME "Duy Smart Home"
#define BLYNK_AUTH_TOKEN "tHxqA6MQuL9-0J7LIsJftU9A7fmZ75GA"
#define BLYNK_PRINT Serial

#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>

char auth[] = BLYNK_AUTH_TOKEN;

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "Wokwi-GUEST";
char pass[] = "";

BlynkTimer timer;


#define button1_pin 26
#define button2_pin 25
#define button3_pin 33
#define button4_pin 32

#define relay1_pin 13
#define relay2_pin 12
#define relay3_pin 14
#define relay4_pin 15

int relay1_state = 0;
int relay2_state = 0;
int relay3_state = 0;
int relay4_state = 0;


//Change the virtual pins according the rooms
#define button1_vpin    V1
#define button2_vpin    V2
#define button3_vpin    V3 
#define button4_vpin    V4

//------------------------------------------------------------------------------
// This function is called every time the device is connected to the Blynk.Cloud
// Request the latest state from the server
BLYNK_CONNECTED() {
  // kết nối các bin button trên wokwi với Blynk
  Blynk.syncVirtual(button1_vpin);
  Blynk.syncVirtual(button2_vpin);
  Blynk.syncVirtual(button3_vpin);
  Blynk.syncVirtual(button4_vpin);
}

//--------------------------------------------------------------------------
BLYNK_WRITE(button1_vpin) {
  // Đọc state và viết state vào chân relay
  relay1_state = param.asInt();
  digitalWrite(relay1_pin, relay1_state);
}
//--------------------------------------------------------------------------
BLYNK_WRITE(button2_vpin) {
  // Đọc state và viết state vào chân relay
  relay2_state = param.asInt();
  digitalWrite(relay2_pin, relay2_state);
}
//--------------------------------------------------------------------------
BLYNK_WRITE(button3_vpin) {
  // Đọc state và viết state vào chân relay
  relay3_state = param.asInt();
  digitalWrite(relay3_pin, relay3_state);
}
//--------------------------------------------------------------------------
BLYNK_WRITE(button4_vpin) {
  // Đọc state và viết state vào chân relay
  relay4_state = param.asInt();
  digitalWrite(relay4_pin, relay4_state);
}
//--------------------------------------------------------------------------


void setup()
{
  // Debug console
  Serial.begin(115200);
  //--------------------------------------------------------------------
  // Set các chân button là INPUT_PULLUP
  pinMode(button1_pin, INPUT_PULLUP);
  pinMode(button2_pin, INPUT_PULLUP);
  pinMode(button3_pin, INPUT_PULLUP);
  pinMode(button4_pin, INPUT_PULLUP);
  //--------------------------------------------------------------------
  // Set các relay là output 
  pinMode(relay1_pin, OUTPUT);
  pinMode(relay2_pin, OUTPUT);
  pinMode(relay3_pin, OUTPUT);
  pinMode(relay4_pin, OUTPUT);
  //--------------------------------------------------------------------
  // Ban đầu set các relay là off
  digitalWrite(relay1_pin, HIGH);
  digitalWrite(relay2_pin, HIGH);
  digitalWrite(relay3_pin, HIGH);
  digitalWrite(relay4_pin, HIGH);
  //--------------------------------------------------------------------
  // Kết nối với Blynk
  Blynk.begin(auth, ssid, pass);
}

void loop()
{
  Blynk.run();
  timer.run();
  
  listen_push_buttons();
}

//MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
void listen_push_buttons(){
    //--------------------------------------------------------------------------
    if(digitalRead(button1_pin) == LOW){
      delay(200);
      control_relay(1);
      Blynk.virtualWrite(button1_vpin, relay1_state); //Cập nhật button state
    }
    //--------------------------------------------------------------------------
    else if (digitalRead(button2_pin) == LOW){
      delay(200);
      control_relay(2);
      Blynk.virtualWrite(button2_vpin, relay2_state); //Cập nhật button state
    }
    //--------------------------------------------------------------------------
    else if (digitalRead(button3_pin) == LOW){
      delay(200);
      control_relay(3);
      Blynk.virtualWrite(button3_vpin, relay3_state); //Cập nhật button state
    }
    //--------------------------------------------------------------------------
    else if (digitalRead(button4_pin) == LOW){
      delay(200);
      control_relay(4);
      Blynk.virtualWrite(button4_vpin, relay4_state); //Cập nhật button state
    }
    //--------------------------------------------------------------------------
}
//MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM




//MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
void control_relay(int relay){
  //------------------------------------------------
  if(relay == 1){
    relay1_state = !relay1_state;
    digitalWrite(relay1_pin, relay1_state);
    Serial.print("Relay1 State = ");
    Serial.println(relay1_state);
    delay(50);
  }
  //------------------------------------------------
  else if(relay == 2){
    relay2_state = !relay2_state;
    Serial.print("Relay2 State = ");
    Serial.println(relay2_state);
    digitalWrite(relay2_pin, relay2_state);
    delay(50);
  }
  //------------------------------------------------
  else if(relay == 3){
    relay3_state = !relay3_state;
    Serial.print("Relay3 State = ");
    Serial.println(relay3_state);
    digitalWrite(relay3_pin, relay3_state);
    delay(50);
  }
  //------------------------------------------------
  else if(relay == 4){
    relay4_state = !relay4_state;
    Serial.print("Relay4 State = ");
    Serial.println(relay4_state);
    digitalWrite(relay4_pin, relay4_state);
    delay(50);
  }
  //------------------------------------------------
}
//MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM