int echopin = 2;
int trigpin = 3;
int Time;
int Distance;


void setup() {
  // put your setup code here, to run once:
pinMode(trigpin, OUTPUT);
pinMode(echopin, INPUT);
Serial.begin(9600);
Serial.print("Ultrasonic Distance: .... ");
}

void loop() {
  // put your main code here, to run repeatedly:
digitalWrite(trigpin, LOW);
digitalWrite(trigpin, HIGH);
Time = pulseIn(echopin, HIGH);
Distance = Time * 0.0172;
Serial.print("Time: ");
Serial.print(Time);
Serial.print(" Microseconds");
delay(1000);
Serial.print(", Distance: ");
Serial.print(Distance);
Serial.println("cm");
delay(1000);

}