#include <Adafruit_SSD1306.h>
#include <Wire.h>
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels
#define OLED_RESET     -1 // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);


// 'icons8-bitcoin-24', 24x24px
const unsigned char ball [] PROGMEM = {
 0xff,0xff,0xff,0xff,
 0xff,0xff,0xff,0xff,
 0xff,0xff,0xff,0xff,
 0xff,0xff,0xff,0xff 
};

const unsigned char plat [] PROGMEM = {
 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff
};

int x =0;
int y =0;

void setup() {
  Serial.begin(115200);

  if (!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
    Serial.println(F("SSD1306 allocation failed"));
    for (;;); // Don't proceed, loop forever
  }

  display.clearDisplay();
  display.setTextSize(1);           
  display.setTextColor(SSD1306_WHITE);      
  display.setCursor(0,0); 
  display.println("Starting BT");
  display.display();
  delay(3000);
}

void loop() {


      //Display Header
//      display.clearDisplay();
//      display.setTextSize(1);
//      printCenter("BTC/USD", 0, 0);
      display.clearDisplay();
      display.drawBitmap(x++, y++, ball, 4, 4, WHITE);
      display.fillRect(4,60,24, 4, WHITE);
      display.display();
      delay(250);
  
}