// KIYANI'S LAB
// https://www.youtube.com/channel/UC-BVfBm27vcdQaH20dnfTpg/featured

#include <EEPROM.h>
int dl;
uint8_t eft, spd, dly, dl1;
uint16_t a, b, ah, al;
void dataWrite(uint16_t data);
bool st;
int iled = 16;
int jled = iled+1;


void setup() {
  // put your setup code here, to run once:
  for (int i = 2; i < jled; i++) {
    pinMode(i, OUTPUT);
  }
 
  pinMode(A4, INPUT_PULLUP);
  pinMode(A5, INPUT_PULLUP);



  a = 1;

  dly = 1;
  eft = EEPROM.read(0);
  spd = EEPROM.read(1);
  if (spd > 7) {
    spd = 2;
  }
  if (eft > 7) {
    eft = 0;
  }

  Serial.begin(9600);
}

void loop() {
  analogWrite(A3, HIGH);
  analogWrite(A3, 200);

  // put your main code here, to run repeatedly:
  if (!digitalRead(A4) & st == 0) {
    Serial.println("Tombol Pin 18 di TEKAN");
    //digitalWrite(16, HIGH);
    st = 1;
    dataWrite(0);
    if (eft < 8) {
      eft++;
      String x = "MODE";
      String y = x + eft ;
      Serial.println(y); 
    }else{
      eft=0;
      String x = "RSTMODE";
      String y = x + eft ;
      Serial.println(y); 
    }
    EEPROM.write(0, eft);
  }
  if (digitalRead(A4) & digitalRead(A5)) {
    st = 0;
  }
  if (!digitalRead(A5) & st == 0) {
    Serial.println("Tombol Pin 19 di TEKAN");
    //digitalWrite(17, HIGH);
    st = 1;

    if (spd < 7) {
      spd++;
      String x = "SPD+";
      String y = x + spd ;
      Serial.println(y); 
    }else{
      spd=1;
      String x = "RSTSPD";
      String y = x + spd ;
      Serial.println(y);
      Serial.println("MODE0");
    }
    EEPROM.write(1, spd);
  }

  //----------
  if (dly > spd) {
    dly = 0;

    if (eft == 0) {
      
      if (dl > 18) {
        dl = 0;
      }
      if (dl == 0) {
        a = 1;
      }
      dl++;
      dataWrite(a);

      if (dl < 18) a = a << 1;
    }
    if (eft == 1) {
      if (dl > 32) {
        dl = 0;
        a = 2;
      }
      if (dl == 0) {
        a = 2;
      }
      dl++;
      if (dl == 16) {
        a = 32768;
      }
      dataWrite(a);

      if (dl < 16)
        a = a << 1;
      else
        a = a >> 1;
    }

    if (eft == 2) {
      if (dl > 8) {
        dl = 0;
      }
      if (dl == 0) {
        ah = 0x8000;
        al = 0x01;
      }
      dl++;

      a = ah | al;

      dataWrite(a);
      al = al << 1;
      ah = ah >> 1;
    }

    if (eft == 3) {
      if (dl > 16) {
        dl = 0;
      }
      if (dl == 0) {
        ah = 0x8000;
        al = 0x01;
      }
      dl++;

      a = ah | al;

      dataWrite(a);
      al = al << 1;
      ah = ah >> 1;
    }
    if (eft == 4) {
      if (dl > 16) {
        dl = 0;
      }
      if (dl == 0) {
        a = 0;
      }
      dl++;

      dataWrite(a);
      a = a << 1;
      a = a | 1;
    }
    if (eft == 5) {
      if (dl > 32) {
        dl = 0;
      }
      if (dl == 0) {
        a = 0;
      }
      dl++;

      dataWrite(a);
      a = a << 1;
      if (dl < 16) {
        a = a | 1;
      }
      if (dl == 16) {
        a = 0xfffe;
      }
    }
    if (eft == 6) {
      if (dl1 == 0 | dl > dl1) {
        dl1 = 16;
        dl = 0;
        a = 1;
        b = 0;
      }
      dl++;

      a = a | b;
      dataWrite(a);
      if (dl < dl1) {
        a = a << 1;
      }

      if (dl == dl1) {
        dl = 0;
        dl1--;
        b = a;
        a = 1;
      }
    }

    if (eft == 7) {
      dataWrite(random(0, 0xffff));
    }
    if (eft == 8) {
        
    }

  }
  dly++;
  delay(10);
}
void dataWrite(uint16_t data) {
  for (int i = 2; i < jled; i++) {
    digitalWrite(i, bitRead(data, i));
    
  }
}