#include <WiFi.h>
#include <PubSubClient.h>
#include <ESP32Servo.h>

Servo myservo; // servo object
const int ledPin = 25; // D25 pin for LED

const char* ssid = "Wokwi-GUEST";
const char* password = "";
const char* mqtt_server = "test.mosquitto.org"; // MQTT broker

WiFiClient espClient;
PubSubClient client(espClient);
long lastMsg = 0;
char msg[50];
int value = 0;

void setup() {
  Serial.begin(115200);
  myservo.attach(5);
  pinMode(ledPin, OUTPUT); // Set D4 pin as output
  digitalWrite(ledPin, LOW); // Initialize LED state
  setup_wifi();
  client.setServer(mqtt_server, 1883);
  client.setCallback(callback);
}

void setup_wifi() {
  delay(10);
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
}

void callback(char* topic, byte* payload, unsigned int length) {
  String string;
  Serial.print("Message arrived [");
  Serial.print(topic);
  Serial.print("] ");
  for (int i = 0; i < length; i++) {
    string += ((char)payload[i]);
  }
  Serial.print(string);

  if (String(topic) == "/ThinkIOT/Servo-nodered") {
    Serial.print(" ");
    int status = string.toInt();
    int pos = map(status, 1, 100, 0, 180);
    Serial.println(pos);
    myservo.write(pos);
    delay(15);
  } else if (String(topic) == "/ThinkIOT/LED-nodered") {
    Serial.print(" ");
    bool status = (string == "true"); // Convert the string to a boolean
    digitalWrite(ledPin, status ? HIGH : LOW); // Use boolean to control the LED
  }
}

void reconnect() {
  while (!client.connected()) {
    Serial.print("Attempting MQTT connection...");
    if (client.connect("ESPClient")) {
      Serial.println("connected");
      client.subscribe("/ThinkIOT/Servo-nodered");
      client.subscribe("/ThinkIOT/LED-nodered");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      delay(5000);
    }
  }
}

void loop() {
  if (!client.connected()) {
    reconnect();
  }
  client.loop();
  delay(100);
}