'this file should already be included in the local file system
' otherwise
' copy this script in the editor page, save and run it
pin.mode 2, output
pin.mode 15, output
pin.mode 34, output
pin(2) = 0 : pin(15) = 1: pin(34) = 1
pos = 100: dir = 5
PWM.SETUP 22, 1, pos, 50, 12
tft.init 0
gui.init 20, black
txt = GUI.Textline(10,50,190,50, "Position:", 3)
analog = GUI.Textline(10,100,190,50, "ADC:", 3)
gui.autorefresh 50
maxscroll.setup 4, 21
maxscroll.print "Annex & WOKWI"
I2C.SETUP 26, 25
OLED.INIT 1 ' init the OLED upside-down
OLED.CLS ' clear the screen
OLED.REFRESH 0
OLED.FONT 2
OLED.COLOR 1
TM1637.SETUP 13, 12, 100
LCD.INIT &h27, 16, 2
pin.mode 5, input,pullup
interrupt 5, pushedME
for z = 1 to 1000
  pin(2) = 1 - pin(2)
  pin(15) = 1 - pin(15)
  pause 200
  PWM.OUT 1, pos
  pos = pos + dir
  if (pos < 100) or (pos > 500) then dir = -dir
  gui.settext txt,"Position " + str$(pos)
  MAXSCROLL.SCROLL 5
  OLED.CLS
  OLED.PRINT 5,10, "Position " + str$(pos)
  OLED.REFRESH 0
  tm1637.print str$(pos)
  LCD.print 1,1, "Position " + str$(pos)
  gui.settext analog,"ADC " + str$(adc(35))
next z

pushedME:
  pause 50 ' avoid rebounds
  if (pin(5) = 0) then 
    LCD.print 1,2, "Button PRESSED "
  else
    LCD.print 1,2, "Button RELEASED"
  end if
  return
  print "Pushed button"

return