#include <Adafruit_SSD1306.h>
#include <Wire.h>
#include <WiFi.h>
#include <HTTPClient.h>
#include <ArduinoJson.h>
#include "secrets.h" // WiFi Configuration (WiFi name and Password)
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels
#define OLED_RESET     -1 // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

const char* ssid = "Wokwi-GUEST";
const char* password = "";

void setup() {
  Serial.begin(115200);

  if (!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
    Serial.println(F("SSD1306 allocation failed"));
    for (;;); // Don't proceed, loop forever
  }

  display.clearDisplay();
  display.setTextSize(1);           
  display.setTextColor(SSD1306_WHITE);      
  display.setCursor(0,0); 
  display.println("Connecting to WiFi...");
  display.display();

  WiFi.begin(ssid, password);

  while (WiFi.status() != WL_CONNECTED)
  {
    delay(500);
  }

  Serial.print("CONNECTED to SSID: ");
  Serial.println(ssid);

  display.print("Connected to ");
  display.println(ssid);
  display.display();
  delay(5000);
  display.clearDisplay();
  display.display();
}

void loop() {
  display.setTextSize(1);           
  display.setTextColor(SSD1306_WHITE);      
  display.setCursor(0,5); 
  display.print("o");
  display.setTextSize(1.8);           
  display.setTextColor(SSD1306_WHITE);      
  display.setCursor(7,8); 
  display.print("C");
  display.display();
}