/*
 * This Arduino Nano code was developed by newbiely.com
 *
 * This Arduino Nano code is made available for public use without any restriction
 *
 * For comprehensive instructions and wiring diagrams, please visit:
 * https://newbiely.com/tutorials/arduino-nano/arduino-nano-tm1637-4-digit-7-segment-display
 */

#include <TM1637Display.h>

// define the connections pins
#define CLK 9
#define DIO 10

// create a display object of type TM1637Display
TM1637Display display = TM1637Display(CLK, DIO);

// an array that sets individual segments per digit to display the word "dOnE"
const uint8_t done[] = {
  SEG_B | SEG_C | SEG_D | SEG_E | SEG_G,         // d
  SEG_A | SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, // O
  SEG_C | SEG_E | SEG_G,                         // n
  SEG_A | SEG_D | SEG_E | SEG_F | SEG_G          // E
};

// degree celsius symbol
const uint8_t celsius[] = {
  SEG_A | SEG_B | SEG_F | SEG_G,  // Degree symbol
  SEG_A | SEG_D | SEG_E | SEG_F   // C
};

void setup() {
  display.clear();
  display.setBrightness(7); // set the brightness to 7 (0:dimmest, 7:brightest)
}

void loop() {
  // show counter 0-9
  int i;
  for (i = 0; i < 10; i++) {
    display.showNumberDec(i);
    delay(500);
  display.clear();
  }

 

  // displayed letters: dOnE
  display.setSegments(done);
  delay(2000);
  display.clear();
}