//// @file    ArrayOfLedArrays.ino
/// @brief   Set up three LED strips, all running from an array of arrays
/// @example ArrayOfLedArrays.ino

// ArrayOfLedArrays - see https://github.com/FastLED/FastLED/wiki/Multiple-Controller-Examples for more info on
// using multiple controllers.  In this example, we're going to set up three NEOPIXEL strips on three
// different pins, each strip getting its own CRGB array to be played with, only this time they're going
// to be all parts of an array of arrays.

#include <FastLED.h>

#define NUM_STRIPS 1
#define NUM_LEDS_PER_STRIP 30
#define DELAY 10
CRGB leds[NUM_STRIPS][NUM_LEDS_PER_STRIP];

// For mirroring strips, all the "special" stuff happens just in setup.  We
// just addLeds multiple times, once for each strip
void setup() {
  // tell FastLED there's 12 NEOPIXEL leds on pin 2
  FastLED.addLeds<NEOPIXEL, 2>(leds[0], NUM_LEDS_PER_STRIP);

  // tell FastLED there's 12 NEOPIXEL leds on pin 3
  FastLED.addLeds<NEOPIXEL, 3>(leds[1], NUM_LEDS_PER_STRIP);

  // tell FastLED there's 12 NEOPIXEL leds on pin 4
  FastLED.addLeds<NEOPIXEL, 4>(leds[2], NUM_LEDS_PER_STRIP);

}

void loop() {
  // This outer loop will go over each strip, one at a time
  for(int x = 0; x < NUM_STRIPS; x++) {
    // This inner loop will go over each led in the current strip, one at a time
    for(int i = 0; i < NUM_LEDS_PER_STRIP; i++) {
      leds[x][i] = CRGB::Red;
      FastLED.show();
      leds[x][i] = CRGB::Black;
      delay(DELAY);
   
    leds[x][i] = CRGB::CRGB::Yellow;
      FastLED.show();
      leds[x][i] = CRGB::Black;
      delay(DELAY);
   
   leds[x][i] = CRGB::CRGB(153, 0, 255);
      FastLED.show();
      leds[x][i] = CRGB::Black;
      delay(DELAY);

      leds[x][i] = CRGB::CRGB(0, 255, 55);
      FastLED.show();
      leds[x][i] = CRGB::Black;
      delay(DELAY);
   
   
   
    }
  }
}