#include <WiFi.h>
#include <PubSubClient.h>

const char* ssid = "Wokwi-GUEST";
const char* password = "";

//const char* mqtt_server = "test.mosquitto.org";
const char* mqtt_server = "mqtt-dashboard.com"; 
//const char* mqtt_server = "broker.mqttdashboard.com";

WiFiClient espClient;
PubSubClient client(espClient);

void setup_wifi() {

  delay(10);
  // We start by connecting to a WiFi network
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);

  WiFi.mode(WIFI_STA);
  WiFi.begin(ssid, password);

  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }

  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
}

void callback(char* topic, byte* payload, unsigned int length) {
 
  Serial.print("Message arrived in topic: ");
  Serial.println(topic);
 
  Serial.print("Message:");
  for (int i = 0; i < length; i++) {
    Serial.print((char)payload[i]);
  }
 
  Serial.println();
  Serial.println("-----------------------");
 
}

void reconnect() {
  // Loop until we're reconnected
  while (!client.connected()) {
    Serial.print("Attempting MQTT connection...");
    // Create a random client ID
    String clientId = "mqtt-explorer-584bcd18";
    clientId += String(random(0xffff), HEX);
    // Attempt to connect
    if (client.connect(clientId.c_str())) {
      Serial.println("Connected");
      client.subscribe("/indobotIoT4-14/mqtt");
      client.subscribe("User1/Temp/DTS1");
      client.subscribe("User1/Hum/DTS1");
      
      //client.subscribe("User1/Hum");
      //client.subscribe("User1/Json");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      // Wait 5 seconds before retrying
      delay(1000);
    }
  }
}

void setup() {
  Serial.begin(115200);
    setup_wifi();
  client.setServer(mqtt_server, 1883);
  client.setCallback(callback);  
}

void loop() {

  if (!client.connected()) {
    reconnect();
  }
  client.loop();
}