// CODE TO FLASH LED 2 then LED3 with Pause switch A0
#include "oled.h"  //load the oled with Adafruit_SSD1306.h library
//############
int blu = 2;  //LED 2 on PIN 2
int pnk = 3;  //LED 3 on PIN 3
int grn = 4;  //LED 4 on PIN 4
int ong = 5;
int blu2 = 6;  //LED 4 on PIN 4
int red = 7;  //LED 4 on PIN 4

void setup() {
  setup_oled();  // Start the OLED Display
}

void loop() {
  display_counter(HIGH);  //NEEDED FOR DISPLAY TO WORK ## ALL LOOP CODE UNDER THIS
  zerocounter(20); // ZERO the counter loop after 20secs

//put your code in here
digitalWrite(blu, HIGH);  //Tiny LED on Pin 13 on board
digitalWrite(pnk, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(grn, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(ong, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(blu2, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(red, LOW);  //Tiny LED on Pin 13 on board
delay(400);

digitalWrite(blu, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(pnk, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(grn, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(ong, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(blu2, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(red, HIGH);  //Tiny LED on Pin 13 on board
delay(400);

digitalWrite(blu, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(pnk, HIGH);  //Tiny LED on Pin 13 on board
digitalWrite(grn, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(ong, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(blu2, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(red, LOW);  //Tiny LED on Pin 13 on board
delay(400);

digitalWrite(blu, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(pnk, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(grn, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(ong, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(blu2, HIGH);  //Tiny LED on Pin 13 on board
digitalWrite(red, LOW);  //Tiny LED on Pin 13 on board
delay(400);

digitalWrite(blu, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(pnk, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(grn, HIGH);  //Tiny LED on Pin 13 on board
digitalWrite(ong, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(blu2, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(red, LOW);  //Tiny LED on Pin 13 on board
delay(400);

digitalWrite(blu, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(pnk, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(grn, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(ong, HIGH);  //Tiny LED on Pin 13 on board
digitalWrite(blu2, LOW);  //Tiny LED on Pin 13 on board
digitalWrite(red, LOW);  //Tiny LED on Pin 13 on board
delay(400);

}