diagram.json

"""
MicroPython TinyRTC I2C Module, DS1307 RTC + AT24C32N EEPROM
https://github.com/mcauser/micropython-tinyrtc
MIT License
Copyright (c) 2018 Mike Causer
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
BCD Format:
https://en.wikipedia.org/wiki/Binary-coded_decimal
"""

from micropython import const

DATETIME_REG = const(0) # 0x00-0x06
CHIP_HALT    = const(128)
CONTROL_REG  = const(7) # 0x07
RAM_REG      = const(8) # 0x08-0x3F

class DS1307(object):
    """Driver for the DS1307 RTC."""
    def __init__(self, i2c, addr=0x68):
        self.i2c = i2c
        self.addr = addr
        self.weekday_start = 1
        self._halt = False

    def _dec2bcd(self, value):
        """Convert decimal to binary coded decimal (BCD) format"""
        return (value // 10) << 4 | (value % 10)

    def _bcd2dec(self, value):
        """Convert binary coded decimal (BCD) format to decimal"""
        return ((value >> 4) * 10) + (value & 0x0F)

    def datetime(self, datetime=None):
        """Get or set datetime"""
        if datetime is None:
            buf = self.i2c.readfrom_mem(self.addr, DATETIME_REG, 7)
            return (
                self._bcd2dec(buf[6]) + 2000, # year
                self._bcd2dec(buf[5]), # month
                self._bcd2dec(buf[4]), # day
                self._bcd2dec(buf[3] - self.weekday_start), # weekday
                self._bcd2dec(buf[2]), # hour
                self._bcd2dec(buf[1]), # minute
                self._bcd2dec(buf[0] & 0x7F), # second
                0 # subseconds
            )
        buf = bytearray(7)
        buf[0] = self._dec2bcd(datetime[6]) & 0x7F # second, msb = CH, 1=halt, 0=go
        buf[1] = self._dec2bcd(datetime[5]) # minute
        buf[2] = self._dec2bcd(datetime[4]) # hour
        buf[3] = self._dec2bcd(datetime[3] + self.weekday_start) # weekday
        buf[4] = self._dec2bcd(datetime[2]) # day
        buf[5] = self._dec2bcd(datetime[1]) # month
        buf[6] = self._dec2bcd(datetime[0] - 2000) # year
        if (self._halt):
            buf[0] |= (1 << 7)
        self.i2c.writeto_mem(self.addr, DATETIME_REG, buf)

    def halt(self, val=None):
        """Power up, power down or check status"""
        if val is None:
            return self._halt
        reg = self.i2c.readfrom_mem(self.addr, DATETIME_REG, 1)[0]
        if val:
            reg |= CHIP_HALT
        else:
            reg &= ~CHIP_HALT
        self._halt = bool(val)
        self.i2c.writeto_mem(self.addr, DATETIME_REG, bytearray([reg]))

    def square_wave(self, sqw=0, out=0):
        """Output square wave on pin SQ at 1Hz, 4.096kHz, 8.192kHz or 32.768kHz,
        or disable the oscillator and output logic level high/low."""
        rs0 = 1 if sqw == 4 or sqw == 32 else 0
        rs1 = 1 if sqw == 8 or sqw == 32 else 0
        out = 1 if out > 0 else 0
        sqw = 1 if sqw > 0 else 0
        reg = rs0 | rs1 << 1 | sqw << 4 | out << 7
        self.i2c.writeto_mem(self.addr, CONTROL_REG, bytearray([reg]))

ds1307.py

"""Implements a HD44780 character LCD connected via ESP32 GPIO pins."""

from lcd_api import LcdApi
from machine import Pin
from utime import sleep_ms, sleep_us


class GpioLcd(LcdApi):
    """Implements a HD44780 character LCD connected via ESP32 GPIO pins."""

    def __init__(self, rs_pin, enable_pin, d0_pin=None, d1_pin=None,
                 d2_pin=None, d3_pin=None, d4_pin=None, d5_pin=None,
                 d6_pin=None, d7_pin=None, rw_pin=None, backlight_pin=None,
                 num_lines=2, num_columns=16):
        """Constructs the GpioLcd object. All of the arguments must be machine.Pin
        objects which describe which pin the given line from the LCD is
        connected to.

        When used in 4-bit mode, only D4, D5, D6, and D7 are physically
        connected to the LCD panel. This function allows you call it like
        GpioLcd(rs, enable, D4, D5, D6, D7) and it will interpret that as
        if you had actually called:
        GpioLcd(rs, enable, d4=D4, d5=D5, d6=D6, d7=D7)

        The enable 8-bit mode, you need pass d0 through d7.

        The rw pin isn't used by this library, but if you specify it, then
        it will be set low.
        """
        self.rs_pin = rs_pin
        self.enable_pin = enable_pin
        self.rw_pin = rw_pin
        self.backlight_pin = backlight_pin
        self._4bit = True
        if d4_pin and d5_pin and d6_pin and d7_pin:
            self.d0_pin = d0_pin
            self.d1_pin = d1_pin
            self.d2_pin = d2_pin
            self.d3_pin = d3_pin
            self.d4_pin = d4_pin
            self.d5_pin = d5_pin
            self.d6_pin = d6_pin
            self.d7_pin = d7_pin
            if self.d0_pin and self.d1_pin and self.d2_pin and self.d3_pin:
                self._4bit = False
        else:
            # This is really 4-bit mode, and the 4 data pins were just
            # passed as the first 4 arguments, so we switch things around.
            self.d0_pin = None
            self.d1_pin = None
            self.d2_pin = None
            self.d3_pin = None
            self.d4_pin = d0_pin
            self.d5_pin = d1_pin
            self.d6_pin = d2_pin
            self.d7_pin = d3_pin
        self.rs_pin.init(Pin.OUT)
        self.rs_pin.value(0)
        if self.rw_pin:
            self.rw_pin.init(Pin.OUT)
            self.rw_pin.value(0)
        self.enable_pin.init(Pin.OUT)
        self.enable_pin.value(0)
        self.d4_pin.init(Pin.OUT)
        self.d5_pin.init(Pin.OUT)
        self.d6_pin.init(Pin.OUT)
        self.d7_pin.init(Pin.OUT)
        self.d4_pin.value(0)
        self.d5_pin.value(0)
        self.d6_pin.value(0)
        self.d7_pin.value(0)
        if not self._4bit:
            self.d0_pin.init(Pin.OUT)
            self.d1_pin.init(Pin.OUT)
            self.d2_pin.init(Pin.OUT)
            self.d3_pin.init(Pin.OUT)
            self.d0_pin.value(0)
            self.d1_pin.value(0)
            self.d2_pin.value(0)
            self.d3_pin.value(0)
        if self.backlight_pin is not None:
            self.backlight_pin.init(Pin.OUT)
            self.backlight_pin.value(0)

        # See about splitting this into begin

        sleep_ms(20)   # Allow LCD time to powerup
        # Send reset 3 times
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        sleep_ms(5)    # need to delay at least 4.1 msec
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        sleep_ms(1)
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        sleep_ms(1)
        cmd = self.LCD_FUNCTION
        if not self._4bit:
            cmd |= self.LCD_FUNCTION_8BIT
        self.hal_write_init_nibble(cmd)
        sleep_ms(1)
        LcdApi.__init__(self, num_lines, num_columns)
        if num_lines > 1:
            cmd |= self.LCD_FUNCTION_2LINES
        self.hal_write_command(cmd)

    def hal_pulse_enable(self):
        """Pulse the enable line high, and then low again."""
        self.enable_pin.value(0)
        sleep_us(1)
        self.enable_pin.value(1)
        sleep_us(1)       # Enable pulse needs to be > 450 nsec
        self.enable_pin.value(0)
        sleep_us(100)     # Commands need > 37us to settle

    def hal_write_init_nibble(self, nibble):
        """Writes an initialization nibble to the LCD.

        This particular function is only used during initialization.
        """
        self.hal_write_4bits(nibble >> 4)

    def hal_backlight_on(self):
        """Allows the hal layer to turn the backlight on."""
        if self.backlight_pin:
            self.backlight_pin.value(1)

    def hal_backlight_off(self):
        """Allows the hal layer to turn the backlight off."""
        if self.backlight_pin:
            self.backlight_pin.value(0)

    def hal_write_command(self, cmd):
        """Writes a command to the LCD.

        Data is latched on the falling edge of E.
        """
        self.rs_pin.value(0)
        self.hal_write_8bits(cmd)
        if cmd <= 3:
            # The home and clear commands require a worst
            # case delay of 4.1 msec
            sleep_ms(5)

    def hal_write_data(self, data):
        """Write data to the LCD."""
        self.rs_pin.value(1)
        self.hal_write_8bits(data)

    def hal_write_8bits(self, value):
        """Writes 8 bits of data to the LCD."""
        if self.rw_pin:
            self.rw_pin.value(0)
        if self._4bit:
            self.hal_write_4bits(value >> 4)
            self.hal_write_4bits(value)
        else:
            self.d3_pin.value(value & 0x08)
            self.d2_pin.value(value & 0x04)
            self.d1_pin.value(value & 0x02)
            self.d0_pin.value(value & 0x01)
            self.hal_write_4bits(value >> 4)

    def hal_write_4bits(self, nibble):
        """Writes 4 bits of data to the LCD."""
        self.d7_pin.value(nibble & 0x08)
        self.d6_pin.value(nibble & 0x04)
        self.d5_pin.value(nibble & 0x02)
        self.d4_pin.value(nibble & 0x01)
        self.hal_pulse_enable()

esp32_gpio_lcd.py

"""Provides an API for talking to HD44780 compatible character LCDs."""

import time

class LcdApi:
    """Implements the API for talking with HD44780 compatible character LCDs.
    This class only knows what commands to send to the LCD, and not how to get
    them to the LCD.

    It is expected that a derived class will implement the hal_xxx functions.
    """

    # The following constant names were lifted from the avrlib lcd.h
    # header file, however, I changed the definitions from bit numbers
    # to bit masks.
    #
    # HD44780 LCD controller command set

    LCD_CLR = 0x01              # DB0: clear display
    LCD_HOME = 0x02             # DB1: return to home position

    LCD_ENTRY_MODE = 0x04       # DB2: set entry mode
    LCD_ENTRY_INC = 0x02        # --DB1: increment
    LCD_ENTRY_SHIFT = 0x01      # --DB0: shift

    LCD_ON_CTRL = 0x08          # DB3: turn lcd/cursor on
    LCD_ON_DISPLAY = 0x04       # --DB2: turn display on
    LCD_ON_CURSOR = 0x02        # --DB1: turn cursor on
    LCD_ON_BLINK = 0x01         # --DB0: blinking cursor

    LCD_MOVE = 0x10             # DB4: move cursor/display
    LCD_MOVE_DISP = 0x08        # --DB3: move display (0-> move cursor)
    LCD_MOVE_RIGHT = 0x04       # --DB2: move right (0-> left)

    LCD_FUNCTION = 0x20         # DB5: function set
    LCD_FUNCTION_8BIT = 0x10    # --DB4: set 8BIT mode (0->4BIT mode)
    LCD_FUNCTION_2LINES = 0x08  # --DB3: two lines (0->one line)
    LCD_FUNCTION_10DOTS = 0x04  # --DB2: 5x10 font (0->5x7 font)
    LCD_FUNCTION_RESET = 0x30   # See "Initializing by Instruction" section

    LCD_CGRAM = 0x40            # DB6: set CG RAM address
    LCD_DDRAM = 0x80            # DB7: set DD RAM address

    LCD_RS_CMD = 0
    LCD_RS_DATA = 1

    LCD_RW_WRITE = 0
    LCD_RW_READ = 1

    def __init__(self, num_lines, num_columns):
        self.num_lines = num_lines
        if self.num_lines > 4:
            self.num_lines = 4
        self.num_columns = num_columns
        if self.num_columns > 40:
            self.num_columns = 40
        self.cursor_x = 0
        self.cursor_y = 0
        self.implied_newline = False
        self.backlight = True
        self.display_off()
        self.backlight_on()
        self.clear()
        self.hal_write_command(self.LCD_ENTRY_MODE | self.LCD_ENTRY_INC)
        self.hide_cursor()
        self.display_on()

    def clear(self):
        """Clears the LCD display and moves the cursor to the top left
        corner.
        """
        self.hal_write_command(self.LCD_CLR)
        self.hal_write_command(self.LCD_HOME)
        self.cursor_x = 0
        self.cursor_y = 0

    def show_cursor(self):
        """Causes the cursor to be made visible."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
                               self.LCD_ON_CURSOR)

    def hide_cursor(self):
        """Causes the cursor to be hidden."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY)

    def blink_cursor_on(self):
        """Turns on the cursor, and makes it blink."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
                               self.LCD_ON_CURSOR | self.LCD_ON_BLINK)

    def blink_cursor_off(self):
        """Turns on the cursor, and makes it no blink (i.e. be solid)."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
                               self.LCD_ON_CURSOR)

    def display_on(self):
        """Turns on (i.e. unblanks) the LCD."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY)

    def display_off(self):
        """Turns off (i.e. blanks) the LCD."""
        self.hal_write_command(self.LCD_ON_CTRL)

    def backlight_on(self):
        """Turns the backlight on.

        This isn't really an LCD command, but some modules have backlight
        controls, so this allows the hal to pass through the command.
        """
        self.backlight = True
        self.hal_backlight_on()

    def backlight_off(self):
        """Turns the backlight off.

        This isn't really an LCD command, but some modules have backlight
        controls, so this allows the hal to pass through the command.
        """
        self.backlight = False
        self.hal_backlight_off()

    def move_to(self, cursor_x, cursor_y):
        """Moves the cursor position to the indicated position. The cursor
        position is zero based (i.e. cursor_x == 0 indicates first column).
        """
        self.cursor_x = cursor_x
        self.cursor_y = cursor_y
        addr = cursor_x & 0x3f
        if cursor_y & 1:
            addr += 0x40    # Lines 1 & 3 add 0x40
        if cursor_y & 2:    # Lines 2 & 3 add number of columns
            addr += self.num_columns
        self.hal_write_command(self.LCD_DDRAM | addr)

    def putchar(self, char):
        """Writes the indicated character to the LCD at the current cursor
        position, and advances the cursor by one position.
        """
        if char == '\n':
            if self.implied_newline:
                # self.implied_newline means we advanced due to a wraparound,
                # so if we get a newline right after that we ignore it.
                self.implied_newline = False
            else:
                self.cursor_x = self.num_columns
        else:
            self.hal_write_data(ord(char))
            self.cursor_x += 1
        if self.cursor_x >= self.num_columns:
            self.cursor_x = 0
            self.cursor_y += 1
            self.implied_newline = (char != '\n')
        if self.cursor_y >= self.num_lines:
            self.cursor_y = 0
        self.move_to(self.cursor_x, self.cursor_y)

    def putstr(self, string):
        """Write the indicated string to the LCD at the current cursor
        position and advances the cursor position appropriately.
        """
        for char in string:
            self.putchar(char)

    def custom_char(self, location, charmap):
        """Write a character to one of the 8 CGRAM locations, available
        as chr(0) through chr(7).
        """
        location &= 0x7
        self.hal_write_command(self.LCD_CGRAM | (location << 3))
        self.hal_sleep_us(40)
        for i in range(8):
            self.hal_write_data(charmap[i])
            self.hal_sleep_us(40)
        self.move_to(self.cursor_x, self.cursor_y)

    def hal_backlight_on(self):
        """Allows the hal layer to turn the backlight on.

        If desired, a derived HAL class will implement this function.
        """
        pass

    def hal_backlight_off(self):
        """Allows the hal layer to turn the backlight off.

        If desired, a derived HAL class will implement this function.
        """
        pass

    def hal_write_command(self, cmd):
        """Write a command to the LCD.

        It is expected that a derived HAL class will implement this
        function.
        """
        raise NotImplementedError

    def hal_write_data(self, data):
        """Write data to the LCD.

        It is expected that a derived HAL class will implement this
        function.
        """
        raise NotImplementedError

    # This is a default implementation of hal_sleep_us which is suitable
    # for most micropython implementations. For platforms which don't
    # support `time.sleep_us()` they should provide their own implementation
    # of hal_sleep_us in their hal layer and it will be used instead.
    def hal_sleep_us(self, usecs):
        """Sleep for some time (given in microseconds)."""
        time.sleep_us(usecs)  # NOTE this is not part of Standard Python library, specific hal layers will need to override this

lcd_api.py

# Wokwi Library List
# See https://docs.wokwi.com/guides/libraries


libraries.txt

from machine import Pin, I2C
from utime import sleep_ms
from esp32_gpio_lcd import GpioLcd
from ds1307 import DS1307

sclPin = Pin(21)  # Serial clock pin
sdaPin = Pin(20)  # Serial data pin
i2c_object = I2C(0, scl=sclPin, sda=sdaPin, freq=400000)
clockObject = DS1307(i2c_object)

# Habilitar módulo RTC 
clockObject.halt(False)  # 32 kHz crystal enable

# Configure the LCD
lcd = GpioLcd(rs_pin=Pin(4),
              enable_pin=Pin(15),
              d4_pin=Pin(5),
              d5_pin=Pin(18),
              d6_pin=Pin(19),
              d7_pin=Pin(22),
              num_lines=2, num_columns=16)
lcd.clear()
lcd.move_to(0, 0)

# Função para adicionar zeros
def adicionarZero(numero):
    if numero < 10:
        return '0' + str(numero)
    else:
        return str(numero)

sel = input("Deseja setar data e hora? (Y/N): ")
if sel.upper() == "Y":
    Y = int(input("Entrada do Ano (YYYY) : "))
    M = int(input("Entrada do Mês (M) : "))
    D = int(input("Entrada do Dia (D) : "))
    h = int(input("Entrada da Hora (H) : "))
    m = int(input("Entrada do Minuto (M) : "))
    s = int(input("Entrada do Segundo (S) : "))
    # Configurar nova data e hora
    clockObject.datetime([Y,M,D,h,m,s,0,0])



while True:   
    # Obter data e hora
    dateTime = clockObject.datetime()

    # Exibir data e hora  
    lcd.clear()
    lcd.putstr("Hora: " + adicionarZero(dateTime[4]) + ":" + adicionarZero(dateTime[5]) + ":" + adicionarZero(dateTime[6]) + "\r\n")
    lcd.move_to(0, 1)
    lcd.putstr("Data: " + adicionarZero(dateTime[2]) + "/" + adicionarZero(dateTime[1]) + "/" + str(dateTime[0]))
    sleep_ms(1000)



main.py

Downloaded from https://wokwi.com/projects/381039164934300673

Simulate this project on https://wokwi.com
