//do not use- use the arduino ide 2 version\


#include <WiFi.h>
#include <WebServer.h>
#include "index.h"
#include "names.h"
#include "complete.h"
#include "messages.h"
#include "header.h"
#include "FS.h"
#include "LittleFS.h"

#define FORMAT_LITTLEFS_IF_FAILED true

/* Put your SSID & Password */
const char* ssid = "Badminton";  // Enter SSID here
const char* password = "12345678";  //Enter Password here


/* Put IP Address details */
IPAddress local_ip(192,168,100,100);
IPAddress gateway(192,168,100,100);
IPAddress subnet(255,255,255,0);

WebServer server(80);

void setup() {

    //set up the Serial port
  Serial.begin(115200);

  //Setup the softAP that will act as the web server
  WiFi.softAP(ssid, password);
  WiFi.softAPConfig(local_ip, gateway, subnet);
  delay(100);
  
  //These are the target pages and what routines are called when they are activated
  server.on("/", handle_OnConnect);
  server.on("/index", handle_OnConnect);
  server.on("/names", handle_names);
  server.on("/messages", handle_messages);
  server.on("/savenames", handle_savenames);
  server.on("/savemess", handle_savemess);
  server.onNotFound(handle_NotFound);
  
  server.begin();
  Serial.println("HTTP server started");

  //Now set up the File System
    if(!LittleFS.begin(FORMAT_LITTLEFS_IF_FAILED)){
      Serial.println("LittleFS Mount Failed");
      return;
  }




}

void handle_OnConnect() {
  Serial.println("ON Connect");
  //READ SPIFFS HERE
  // send the HTTP response body
  String html = String(HTML_HEADER)+String(HTML_INDEX);
  server.send(200, "text/html",html);
  delay(10);
}

void handle_names() {
int lp;
int namecount;
String currentname;
String bNames[16][30];

//First things firsts, grab the HTML file
String html = String(HTML_HEADER)+String(HTML_NAMES);

  Serial.println("ON Add Names");
  //READ SPIFFS HERE
  // send the HTTP response body

  File f = LittleFS.open("NAMES.DAT", "r");
  namecount=0;
  while(f.available()){
   namecount++;
   currentname=f.read();
   html.replace("PN"+String(namecount), currentname); // replace the marker by a real value
  }
  f.close();
  //At this point, namecount is the number of names, so we need to blank the "non names"

  for (lp=namecount+1;lp<16;lp++) {
    html.replace("PN"+String(namecount), ""); // replace the marker by a real value
  }
  server.send(200, "text/html",html);
  delay(10);
}

void handle_messages() {
byte lp;
String currentmess;

  Serial.println("ON Add messages");
  //READ SPIFFS HERE
  // send the HTTP response body
  String html = String(HTML_HEADER)+String(HTML_MESSAGES);
  for (lp=1;lp<16;lp++) {
    currentmess="New_message"+String(lp);
    html.replace("PN"+String(lp), currentmess); // replace the marker by a real value
  }
  server.send(200, "text/html",html);
  delay(10);
}

void handle_savenames() {
byte lp;
String currentname;

  Serial.println("ON Saving Names");
  //SAVE DATA HERE
  // send the HTTP response body
  String html = String(HTML_HEADER)+String(HTML_COMPLETE);
  server.send(200, "text/html",html);
  delay(10);
}

void handle_savemess() {
byte lp;
String currentname;

  Serial.println("ON Saving MESSAGES");
  //SAVE DATA HERE
  // send the HTTP response body
  String html = String(HTML_HEADER)+String(HTML_COMPLETE);
  server.send(200, "text/html",html);
  delay(10);
}

void handle_NotFound(){
  server.send(404, "text/plain", "Not found");
}


void loop() {
  server.handleClient();
  
}




#define FSrecordsize 49
#define debugmode true


String filename="/eeprom.dat";
String tempfile="/tempdata.dat";

byte WiFi_result[8]; //the current Wi-Fi result
byte Inet_result[8]; //the current Internet Connection result
int WiFi_RSSI[8];
byte WiFi_old_result[8];
byte Inet_old_result[8];
int WiFi_old_RSSI[8];
byte eventTimeStamp[6]; 
byte power_mask = 7;
byte current_power_reading;                                  //we store the opto values in 0,1,2 and a copy of them in 3,4,5
byte last_power_read; 

#define SEND_EMAIL 30
#define SEND_GPRS 31
#define SEND_SMS 32
#define SEND_SERIAL 33
#define SEND_ALL_FAILED -5
#define SEND_EMULATION 34
#define SEND_NOTHING_TO_SEND 35

void OLEDwrite(String temp,byte x,byte y) {
  Serial.println("ÖLED :"+temp);
}

void OLEDupdateEP(byte y) {
  Serial.printf("EP= %02d",y);
}

void encodeEEPROM() {
  bool filefail=0;

  File f = LittleFS.open(filename, "ab");
  if (!f) {
      Serial.println("file open failed for appending");
      filefail=true;
  }

  if (filefail==false) {
    writeFile(f);
  } else {
    #if (debugmode)
      Serial.println("Unable to openfile "+filename);
    #endif
  }
  f.close();
}


void writeFile(File f) {     //encodeEEPROM() {
int lp;

  OLEDwrite("WRITE FILE ",0,0);

  #if (debugmode)
  Serial.println("");
    Serial.println("W Result");
  #endif
  //we can write to the file
  for (lp = 0; lp < 8;lp++) {
    f.write(WiFi_result[lp]);
    #if (debugmode)
      Serial.printf("%02d %04d ",lp, WiFi_result[lp]);
    #endif
  }
  
  #if (debugmode)
  Serial.println("");
    Serial.println("WO Result");
  #endif
  //we can write to the file
  for (lp = 0; lp < 8;lp++) {
    f.write(WiFi_old_result[lp]);
    #if (debugmode)
      Serial.printf("%02d %04d ",lp, WiFi_old_result[lp]);
    #endif
  }
  
  #if (debugmode)
    Serial.println("");
    Serial.println("I Result");
  #endif
  //we can write to the file
  for (lp = 0; lp < 8;lp++) {
    f.write(Inet_result[lp]);
    #if (debugmode)
      Serial.printf("%02d %04d ",lp, Inet_result[lp]);
    #endif
  }
  
  #if (debugmode)
    Serial.println("");
    Serial.println("IO Result");
  #endif
  //we can write to the file
  for (lp = 0; lp < 8;lp++) {
    f.write(Inet_old_result[lp]);
    #if (debugmode)
      Serial.printf("%02d %04d ",lp, Inet_old_result[lp]);
    #endif
  }
  
  
  #if (debugmode)
    Serial.println("");
    Serial.println("RSSI Result");
  #endif
  //we can write to the file
  for (lp = 0; lp < 8;lp++) {
    f.write(WiFi_RSSI[lp]);
    #if (debugmode)
      Serial.printf("%02d %04d ",lp, WiFi_RSSI[lp]);
    #endif
  }
  
  #if (debugmode)
    Serial.println("");
    Serial.println("TimeStamp");
  #endif
  //we can write to the file
  for (lp = 0; lp < 6;lp++) {
    f.write(eventTimeStamp[lp]);
    #if (debugmode)
      Serial.printf("%02d %04d ",lp, eventTimeStamp[lp]);
    #endif
  }
  
    #if (debugmode)
      Serial.println("");
      Serial.println("VARS DATA OUT");
      Serial.printf("%04d ",power_mask);
      Serial.printf("%04d ",current_power_reading);
      Serial.printf("%04d ",last_power_read);
      Serial.println();
    #endif
  
  f.write(power_mask); //The power mask for the opto card
  f.write(current_power_reading); //The power mask for the opto card
  f.write(last_power_read); //The power mask for the opto card
  
}


void processEEPROM() {
     //Look and see if there is data waiting in the EEPROM
     //if there is, process it .
     //
     //Firstly, we have to preserve the state of the variables as the decode routine will over-write them
     //then we decode each item at a time and pass it to the "decide and send" routine.
     //if we get "send success" we process the next one.
     //Before we leave, we must put the data back in the variables.
     //

int lp;        //general loop variable
byte dataByte;
bool filefail;
int records;
int ctr;
unsigned int recptr;
unsigned int filesize;
bool tempfileused;
byte failfilectr;

byte copy_WiFi_result[8]; //the current Wi-Fi result
byte copy_Inet_result[8]; //the current Internet Connection result
int copy_WiFi_RSSI[8];
byte copy_WiFi_old_result[8];
byte copy_Inet_old_result[8];
int copy_WiFi_old_RSSI[8];
byte copy_eventTimeStamp[6];
byte copy_power_mask;
byte copy_current_power_reading;
byte copy_last_power_read;

int message_success;
int message_fail;


  //Preserve the current variables regardless of what we are doing
  OLEDwrite("READ EEPROM",0,0);
  for (lp = 0; lp < 8;lp++) {
       copy_WiFi_result[lp]=WiFi_result[lp];          // Bytes 1-8
       copy_WiFi_old_result[lp]=WiFi_old_result[lp];  // Bytes 9-16
       copy_Inet_result[lp]=Inet_result[lp];          // Bytes 17-24
       copy_Inet_old_result[lp]=Inet_old_result[lp];  // Bytes 25-32
       copy_WiFi_RSSI[lp]=WiFi_RSSI[lp];              // Bytes 33-40
  }
  for (lp = 0; lp <=6;lp++) {
       copy_eventTimeStamp[lp]=eventTimeStamp[lp];    // Bytes 41-45
  }
      
  copy_power_mask=power_mask;                         // Bytes 46
  copy_current_power_reading=current_power_reading;   // Bytes 47
  copy_last_power_read=last_power_read;               // Bytes 48

 #if (debugmode) 
      Serial.print("Is there any EEPROM data to send? ");
 #endif

  ctr=0;
  recptr=0;
  tempfileused=false;
  failfilectr=0;

   if (LittleFS.exists(filename)) {
    LittleFS.remove(tempfile);  //remove the temporary file that holds any failed calls.
    File f = LittleFS.open(filename, "rb"); //Open for reading
    filesize=f.size();

    Serial.print("Yes");
    Serial.println();
    #if (debugmode) 
        Serial.printf("File Size %05d - Pointer %05d",filesize, recptr);
        Serial.println();
    #endif 
      while (recptr<filesize) {
      message_fail=false;

      readRecord(f);                                                 //decode the current slot number
      message_success=decide_method_and_send(true,true);                    //so find out how to send it.
      if ((message_success!=SEND_EMAIL) && (message_success!=SEND_GPRS)) {   //the message did not send
            #if (debugmode) 
                Serial.printf("---------->>>>  File Data did not send %04d",recptr);
                Serial.println();
                tempfileused=true;
                File failfile = LittleFS.open(tempfile, "ab"); //Open for append
                writeFile(failfile);
                failfilectr++;
                failfile.close();
            #endif
            message_fail=true;
      } else {
            //the message was sent
            #if (debugmode) 
                Serial.printf("Send Success %04d",recptr);
                Serial.println();
            #endif
      }
      ctr++;
      recptr=ctr*FSrecordsize;
      f.seek(ctr*FSrecordsize,SeekSet);
    } 
    f.close();
  }

  OLEDupdateEP(failfilectr);

  //Reinstate the variables before we leave
  for (lp = 0; lp < 8;lp++) {
        WiFi_result[lp]=copy_WiFi_result[lp];
        WiFi_old_result[lp]=copy_WiFi_old_result[lp];
        Inet_result[lp]=copy_Inet_result[lp];
        Inet_old_result[lp]=copy_Inet_old_result[lp];
        WiFi_RSSI[lp]=copy_WiFi_RSSI[lp];
  }
  for (lp = 0; lp <=6;lp++) {
        eventTimeStamp[lp]=copy_eventTimeStamp[lp];
  }
  
  power_mask=copy_power_mask;
  current_power_reading=copy_current_power_reading;
  last_power_read=copy_last_power_read;
  
  LittleFS.remove(filename);    //we are finished with the file, so delete it.
  if (tempfileused) { 
    LittleFS.rename(tempfile,filename); //if we have some that could not send, change the name.
  }
}

void readRecord(File f) {                       
int lp;
int ctr;
byte savedata[33];
byte temp;
int read_addr;
int addr;
char rslt[1];

  #if (debugmode)
    Serial.printf("reading record %02d ",f.position()/FSrecordsize);
    Serial.println();
    // Serial.println("First Read Address " + String((whichslot*33)+2));
  #endif


   #if (debugmode)
    Serial.println("W Read");
  #endif
  for (lp = 0; lp < 8;lp++) {
    f.readBytes(rslt,1);
    WiFi_result[lp]=rslt[0];
  #if (debugmode)
    Serial.printf("%02d %04d ",lp, WiFi_result[lp]);
  #endif
  }

  #if (debugmode)
    Serial.println("");
    Serial.println("WO Read");
  #endif
  for (lp = 0; lp < 8;lp++) {
    f.readBytes(rslt,1);
    WiFi_old_result[lp]=rslt[0];
  #if (debugmode)
    Serial.printf("%02d %04d ",lp, WiFi_old_result[lp]);
  #endif
  }

    #if (debugmode)
    Serial.println("");
    Serial.println("I Read");
  #endif
  for (lp = 0; lp < 8;lp++) {
    f.readBytes(rslt,1);
    Inet_result[lp]=rslt[0];
    #if (debugmode)
      Serial.printf("%02d %04d ",lp, Inet_result[lp]);
    #endif
  }    

  #if (debugmode)
    Serial.println("");
    Serial.println("IO Read");
  #endif
  for (lp = 0; lp < 8;lp++) {
    f.readBytes(rslt,1);
    Inet_old_result[lp]=rslt[0];
    #if (debugmode)
    Serial.printf("%02d %04d ",lp, Inet_old_result[lp]);
  #endif
  }

  #if (debugmode)
    Serial.println("");
    Serial.println("RSSI Read");
  #endif
  for (lp = 0; lp < 8;lp++) {
      f.readBytes(rslt,1);
    WiFi_RSSI[lp]=rslt[0];
    #if (debugmode)
    Serial.printf("%02d %04d ",lp, WiFi_RSSI[lp]);
  #endif
  }

  #if (debugmode)
    Serial.println("");
    Serial.println("Timestamp Read");
  #endif
  for (lp = 0; lp < 6;lp++) {
      f.readBytes(rslt,1);
    eventTimeStamp[lp]=rslt[0];
    #if (debugmode)
    Serial.printf("%02d %04d ",lp, eventTimeStamp[lp]);
  #endif
  }

    f.readBytes(rslt,1);
    power_mask=rslt[0];
    f.readBytes(rslt,1);
    current_power_reading=rslt[0];
    f.readBytes(rslt,1);
    last_power_read=rslt[0];
  #if (debugmode)
    Serial.printf("VARS - %04d ",power_mask);
    Serial.printf("VARS - %04d ",current_power_reading);
    Serial.printf("VARS - %04d ",last_power_read);
  #endif

    #if (debugmode)
    Serial.println("");
  #endif
}


byte decide_method_and_send(int x, int y) {
  //do nothing
  if (random(0,10000)>9500) {
    return 999;
  } else {
    return SEND_EMAIL;
  }
  
}



void createRandom(int startpoint) {
int lp;

    for (lp = 0; lp < 8;lp++) {
         WiFi_result[lp]=startpoint;
         WiFi_old_result[lp]=9-startpoint;
         Inet_result[lp]=-(lp>4);
         Inet_old_result[lp]=!Inet_result[lp];
         WiFi_RSSI[lp]=startpoint*10;
    }
    for (lp = 0; lp <=6;lp++) {
         eventTimeStamp[lp]=lp+startpoint;
    }
    
    power_mask=200+startpoint;
    current_power_reading=201+startpoint;
    last_power_read=202+startpoint;
}

void setup(){
  int llp;
  int rnum;
  Serial.begin(115200);
  randomSeed(digitalRead(0));


rnum=random(1,40);
Serial.printf("Writing %02d Records",rnum);
for (llp=0;llp<rnum;llp++) {
  createRandom(llp);
  encodeEEPROM();
}
  Serial.println("Done - wait");
  delay(1000);
  processEEPROM();
  Serial.println("--------------------------------------------------------------------------");
  processEEPROM();
  Serial.println("Finished");
}