#include <DHTesp.h>;
#include <WiFi.h>
#include <ThingSpeak.h>



//wifi setup line
char ssid[] = "Wokwi-GUEST";
char pass[] = "";
WiFiClient client;
unsigned long myChannelNumber = 2253935;
const char * myWriteAPIKey = "WL4X5SBXVM8MYH2G";
int statusCode;

DHTesp dht;
int relay=19;
int temp;
TempAndHumidity data;
void setup() {
  Serial.begin(115200);
  //
  //wifi mode setup
  WiFi.mode(WIFI_STA);
  ThingSpeak.begin(client);
pinMode(relay, OUTPUT);
digitalWrite(relay,HIGH);
  dht.setup(12,DHTesp::DHT22);
}
void loop() {
  //wifi connection setup
   if(WiFi.status() != WL_CONNECTED)
  {
  Serial.print("Attempting to connect");
    while(WiFi.status() != WL_CONNECTED)
    {
    WiFi.begin(ssid, pass); 
    Serial.print(".");
    delay(5000);
    }
  Serial.println("\nConnected.");
  }

  // put your main code here, to run repeatedly:
  data=dht.getTempAndHumidity();
  temp=data.temperature;
  Serial.println("humidity: " + String(data.humidity));
  Serial.println("Temp: " + String(data.temperature));

  if( temp>50){

   digitalWrite(relay,HIGH);


  }

  else {digitalWrite(relay,LOW);}







delay (1000);










  //delay(10); // this speeds up the simulation

 /* ThingSpeak.setField(1, data.humidity);
  ThingSpeak.setField(2, data.temperature);

statusCode = ThingSpeak.writeFields(myChannelNumber,myWriteAPIKey);
  if(statusCode == 200) { //successful writing code
Serial.println("Channel update successful.");
}
else {
Serial.println("Problem Writing data. HTTP error code :" +
String(statusCode));
}*/
  //delay(15000);

}