// code for controlling servo motor using nodered dashboard

#include <WiFi.h>
#include <PubSubClient.h>
#include <ESP32Servo.h> 
#include <DHTesp.h>
Servo myservo;// servo onject 
DHTesp dht; 
const char* ssid = "Wokwi-GUEST";
const char* password = "";
const char* mqtt_server = "test.mosquitto.org";// MQTT broker
 
WiFiClient espClient;
PubSubClient client(espClient);
unsigned long lastMsg = 0;
char msg[50];
int value = 0;
void setup() {

  Serial.begin(115200);
   myservo.attach(5);
  setup_wifi();
  client.setServer(mqtt_server, 1883);
  client.setCallback(callback);
  dht.setup(15, DHTesp::DHT22);
}
void setup_wifi() {
  delay(10);
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
}
void callback(char* topic, byte* payload, unsigned int length) {
   String string;
  Serial.print("Message arrived [");
  Serial.print(topic);
  Serial.print("] ");
  for (int i = 0; i < length; i++) {
     string+=((char)payload[i]);  
  }
    Serial.print(string);
if (topic ="/EME/Servo")  /// esp32 subscribe topic //0,50,100   
    Serial.print(" ");
   int status = string.toInt();   
   int pos = map(status, 1, 100, 0, 180);//100
   Serial.println(pos);
    myservo.write(pos);
    delay(15);  
 }
void reconnect() {
  while (!client.connected()) {
    Serial.print("Attempting MQTT connection...");
    if (client.connect("ESPClient")) {
      Serial.println("connected");
      client.subscribe("/Servo1");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds"); 
      delay(5000);
   }}}
void loop() {
  if (!client.connected()) {
    reconnect();
  }
  client.loop(); 
  if (millis() - lastMsg > 2000) { //perintah publish data

    TempAndHumidity  data = dht.getTempAndHumidity();
    String temp = String(data.temperature, 2);
    client.publish("/TEMP1", temp.c_str()); // publish temp topic /ThinkIOT/temp
    String hum = String(data.humidity, 1); 
    client.publish("/HUMD1", hum.c_str());   // publish hum topic /ThinkIOT/hum

    Serial.print("Temperature: ");
    Serial.println(temp);
    Serial.print("Humidity: ");
    Serial.println(hum);
    lastMsg = millis();
  }
 delay(100);
 
}