#include <Wire.h>
#include <Adafruit_GFX.h> 
#include <Adafruit_SSD1306.h>
#include <DHTesp.h> 



const int DHT_PIN = 15; 
DHTesp dhtSensor; 

#define SCREEN_WIDTH 128 // OLED display Width, in pixels 
#define SCREEN_HEIGHT 64 // OLED display height, in pixels 
// Declaration for an 5013% display connected to 12C (SDA, SCL Pins) 
Adafruit_SSD1306 oled(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, -1);

void setup() {
  Serial.begin(9600);

  // initialize OLED display with I2C address 0x3C
  if (!oled.begin(SSD1306_SWITCHCAPVCC, 0x3C)) {
    Serial.println(F("failed to start SSD1306 OLED"));
    while (1);
  }

  delay(2000);         // wait two seconds for initializing
  oled.clearDisplay(); // clear display

  oled.setTextSize(1);         // set text size
  oled.setTextColor(WHITE);    // set text color
  oled.setCursor(0, 2);       // set position to display (x,y)
  oled.println("Robotronix"); // set text
  oled.display();              // display on OLED
}

void loop() {
  oled.clearDisplay();
  oled.setCursor(0, 10);
  TempAndHumidity data = dhtSensor.getTempAndHumidity();
  oled.println("Temp:" + String(data.temperature, 2) + "C°");
  oled.println("Humidity:" + String(data.humidity, 1) + "%");
  oled.display();
  delay(100);
}