#define BLYNK_TEMPLATE_ID "TMPL6xQHpAnXx"
#define BLYNK_TEMPLATE_NAME "TGS AKHIR PLE RAMOS 01"
#define BLYNK_AUTH_TOKEN "QwDt4nYYLl5_J8C8V1FWkdd3jxgELVdT"
//**********BLYNK, library**************************************
#include <BlynkSimpleEsp32.h>
#include <WiFi.h>
#include <WiFiClient.h>

//***********SERVO, library************************************
#include <ESP32Servo.h>
Servo servo;
int pos = 0;

//**********BLYNK, ssid, pass, token****************************
char auth[] = BLYNK_AUTH_TOKEN;
char ssid[] = "Wokwi-GUEST";
char pass[] = "";

//**********ULTRASONIC, library*********************************
#define trigPin1 18 // Ubah pin sesuai dengan koneksi perangkat keras Anda
#define echoPin1 19 // Ubah pin sesuai dengan koneksi perangkat keras Anda
#define trigPin2 23 // Ubah pin sesuai dengan koneksi perangkat keras Anda
#define echoPin2 22 // Ubah pin sesuai dengan koneksi perangkat keras Anda

void setup() {
  //********SERVO, setting pin*********************************
  servo.attach(15);

  //********BLYNK, mulai koneksi ke blynk***********************
  Blynk.begin(auth, ssid, pass);

  //********ULTRASONIC, setting pin*****************************
  pinMode(trigPin1, OUTPUT);
  pinMode(echoPin1, INPUT);
  pinMode(trigPin2, OUTPUT);
  pinMode(echoPin2, INPUT);

  //********BLYNK, menambahkan widget Label************************
  Blynk.virtualWrite(V1, "Jarak Sensor 1: ");
  Blynk.virtualWrite(V2, "Jarak Sensor 2: ");
}

void loop() {
  //********BLYNK, menjalankan blynk****************************
  Blynk.run();

  //********ULTRASONIC, membaca jarak****************************
  long duration1, distance1, duration2, distance2;

  // Sensor 1
  digitalWrite(trigPin1, LOW);
  delayMicroseconds(2);
  digitalWrite(trigPin1, HIGH);
  delayMicroseconds(10);
  digitalWrite(trigPin1, LOW);
  duration1 = pulseIn(echoPin1, HIGH);
  distance1 = (duration1 / 2) * 0.0343;

  // Sensor 2
  digitalWrite(trigPin2, LOW);
  delayMicroseconds(2);
  digitalWrite(trigPin2, HIGH);
  delayMicroseconds(10);
  digitalWrite(trigPin2, LOW);
  duration2 = pulseIn(echoPin2, HIGH);
  distance2 = (duration2 / 2) * 0.0343;

  // Tampilkan hasil di Blynk
  Blynk.virtualWrite(V1, "Jarak Sensor 1: " + String(distance1) + " cm");

  if (distance2 <= 50 && distance2 >= 0) {
    Blynk.virtualWrite(V2, "Ada kendaraan dalam garasi");
  } else {
    Blynk.virtualWrite(V2, "Tidak ada kendaraan dalam garasi");
  }

  delay(1000); // Tunggu sebentar sebelum mengukur lagi
}