#include <math.h>

// Sensing Analog pin input at A5 pin and converting it to digital value on the Arduino Uno Board

int sensorPin = A5; // select the arduino board input pin A5


double Thermister(int RawADC)
  {
    double Temp = 0.0;
    double Lux = 0.0;
    //Serial.println(analogRead(sensorPin));
    //Serial.println (digitalRead(sensorPin));
    Temp = (RawADC*0.17)-55; // Temprature Value Range is -55 to 125,
    Lux = RawADC*0.0977517106549365; //Lux Range is 0 to 100K 
    Serial.println(RawADC);
    Serial.println(Lux);
       return Temp;

  }

void setup()
  {
    Serial.begin(9600);
  }

void loop()
  {

    //Serial.println(analogRead(sensorPin));
    //Serial.println(digitalRead(sensorPin));
    Serial.println(Thermister(analogRead(sensorPin))); //read pin A5
    //Serial.print(Thermister(digitalRead(sensorPin))); //read pin A5
    //Serial.println("C");
    delay(500);

  }