#define ECHO_PIN 33
#define TRIG_PIN 14

void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  pinMode(TRIG_PIN, OUTPUT);
  pinMode(ECHO_PIN, INPUT);
}

void loop() {
  // put your main code here, to run repeatedly:
  digitalWrite(TRIG_PIN, LOW);
  delayMicroseconds(2);
  digitalWrite(TRIG_PIN, HIGH);
  delayMicroseconds(10);
  digitalWrite(TRIG_PIN, LOW);
  int duration = pulseIn(ECHO_PIN, HIGH);
  float distance = duration * 0.034 / 2;

  Serial.print("Jarak: ");
  Serial.println(distance);

  delay(100); // this speeds up the simulation
}