//SITI NURHALIMAH
//2103411030
//Penggunaan fungsi if pada 3 buah LED dan sensor suhu 

#include "DHTesp.h"

const int DHT_PIN = 19;
int ledbiru= 5;
int ledkuning= 4;
int ledmerah= 2;

DHTesp dhtSensor;

void setup() {
  pinMode(ledbiru, OUTPUT);
  pinMode(ledkuning, OUTPUT);
  pinMode(ledmerah, OUTPUT);
  Serial.begin(115200);
  dhtSensor.setup(DHT_PIN, DHTesp::DHT22);  
  digitalWrite(ledbiru, LOW);
  digitalWrite(ledkuning, LOW);
  digitalWrite(ledmerah, LOW);
}
void loop() {
  TempAndHumidity  data = dhtSensor.getTempAndHumidity();
  Serial.println("Temp: " + String(data.temperature, 2) + "°C" );
  Serial.println("Humidity: " + String(data.humidity, 1) + "%");
  Serial.println("---");
  Suhu = data.temperature
  Kelembapan = data.humidity
  delay(2000); // Wait for a new reading from the sensor (DHT22 has ~0.5Hz sample rate)
  //===================================
  
  if( data.temperature < 15) {
    Serial.print("Suhu Dingin");
    digitalWrite(ledbiru, HIGH);
    digitalWrite(ledkuning, LOW);
    digitalWrite(ledmerah, LOW);
  }
  if (data.temperature <15 && data.temperature >27) {
    Serial.print("Suhu Sedang");
    digitalWrite(ledbiru, LOW);
    digitalWrite(ledkuning, HIGH);
    digitalWrite(ledmerah, LOW);
  }
  if(data.temperature > 27) {
    Serial.print("Suhu Panas");
    digitalWrite(ledbiru, LOW);
    digitalWrite(ledkuning, LOW);
    digitalWrite(ledmerah, HIGH);
  }
  Serial.print(" Suhu : ");
  Serial.print(data.temperature);
  Serial.println("  °C");
  delay(500);
}