/* STM32 Blue Pill project using the STM32 Arduino Core (stm32duino) */
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED width,  in pixels
#define SCREEN_HEIGHT 64 // OLED height, in pixels

// create an OLED display object connected to I2C
Adafruit_SSD1306 oled(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, -1);

void setup() {
  pinMode(A0, INPUT);
  Serial.begin(115200);
  Serial.println("STM32 Temperature Sensor");

  // initialize OLED display with I2C address 0x3C
  if (!oled.begin(SSD1306_SWITCHCAPVCC, 0x3C)) {
    Serial.println(F("failed to start SSD1306 OLED"));
    while (1);
  }

  delay(2000);         // wait two seconds for initializing
  oled.clearDisplay(); // clear display

  oled.setTextSize(1);         // set text size
  oled.setTextColor(WHITE);    // set text color
  oled.setCursor(0, 2);       // set position to display (x,y)
  oled.println("Robotronix"); // set text
  oled.display();              // display on OLED
}

void loop() {
  Serial.println(analogRead(A0));
  delay(200);
}