#include <Wire.h>
#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels

// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)
#define OLED_RESET     -1 // Reset pin # (or -1 if sharing Arduino reset pin)

Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);


void setup() { 
  pinMode(8, INPUT_PULLUP);
  pinMode(7, INPUT_PULLUP);


  display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // Default OLED address, usually
  display.clearDisplay();

}

int a = 0;
void d1() {

  display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // Default OLED address, usually
  display.clearDisplay();

  delay(10);

  display.setTextSize(1);
  display.setTextColor(WHITE);
  display.setCursor(0,a);
  display.print("\|/");
  display.display();
  display.clearDisplay();
  a += 10;
}
void d2() {
  display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // Default OLED address, usually
  display.clearDisplay();

  delay(10);

  display.setTextSize(1);
  display.setTextColor(WHITE);
  display.setCursor(0,0);
  display.print("Irman Ganteng");
  display.display();
  display.clearDisplay();
}


void loop() {
  if (digitalRead(8) == 0) {d1();}
  if (digitalRead(7) == 0) {d2();}
  }