// import a library for an LCD
#include <LiquidCrystal.h>

void diodePulseToggle();
void writeLCDMessage();
bool shouldResetSecondRow();
void writeLCDRelayState();
void lcdRowReset(int rowNr);
void createSpecialCharacters();

// LCD setup
const int RS = 11,
			E = 12,
			D4 = 6,
			D5 = 5,
			D6 = 4,
			D7 = 3;
LiquidCrystal lcd(RS,E,D4,D5,D6,D7);

const int LCD_COLS = 16;
const int LCD_ROWS = 2;
const int LCD_2_ROW_START_COL = 7;


// pins declarations
//const int redLedPin = 8;
//const int greenLedPin = 7;

const int redBtnPin = 2;

const int relayPin = 7;


// arrays with pin numbers
const int ledPinNrsArray[] = {relayPin};
const int btnPinNrsArray[] = {redBtnPin};
const char *const pinColors[] = {};
const char *const pinColorsPL[] = {};
int ledStates[] = {0, 0};

// length counter for the above 
const int amountOfPinsUsed = (sizeof(ledPinNrsArray) / sizeof(ledPinNrsArray[0]));


// diodes counter
int x = 0;
// init diode status
int shouldLightOn = 0;
int relayState = 0;

// time counter initial values
unsigned long previousMillis = 0;
const long interval = 1000;
unsigned long currentMillis = 0;



const byte a_[8] = { //ą
  B00000,
	B01110,
  B00001,
  B01111,
  B10001,
  B01111,
  B00010,
  B00001,
};
const byte c_[8] = { //ć
  B00010,
  B00100,
  B01110,
  B10000,
  B10000,
  B10001,
  B01110,
  B00000,
};
const byte e_[8] = { //ę
  B00000,
  B01110,
  B10001,
  B11111,
  B10000,
  B01110,
  B00100,
  B00010,
};
const byte l_[8] = { //ł
  B01100,
  B00100,
  B00100,
  B00110,
  B01100,
  B00100,
  B01110,
  B00000,
};
const byte n_[8] = { //ń
	B00010,
  B00100,
  B10110,
  B11001,
  B10001,
  B10001,
  B10001,
  B00000,
};
const byte o_[8] = { //ó
	B00010,
  B00100,
  B01110,
  B10001,
  B10001,
  B10001,
  B01110,
  B00000,
};
const byte s_[8] = { //ś
	B00010,
  B00100,
  B01110,
  B10000,
  B01110,
  B00001,
  B11110,
  B00000,
};
const byte z__[8] = { //ź
  B00010,
  B00100,
  B11111,
  B00010,
  B00100,
  B01000,
  B11111,
  B00000,
};
const byte z_[8] = { //ż
  B00100,
  B00000,
  B11111,
  B00010,
  B00100,
  B01000,
  B11111,
  B00000,
};
const byte heartSymbol[8] = {
  B00000,
  B01010,
  B11111,
  B11111,
  B01110,
  B00100,
  B00000,
  B00000
};
const byte resetCharacter[8] = {
  B00000,B00000,B00000,B000000,B00000,B00000,B00000,B00000
};


void setup() {
  Serial.begin(9600);
  
	createSpecialCharacters();
	// lcd printing init
	lcd.begin(16,2);
	// set cursor at the beginning (col, row)
	lcd.setCursor(0,0);
  lcd.print("Przeka");
  lcd.write(byte(4));
	lcd.print("nik");
  lcd.setCursor(5,0);
  lcd.write(byte(3));
	// declare using pins
	for (int i = 0; i < amountOfPinsUsed; i++) {
		pinMode(ledPinNrsArray[i], OUTPUT);
  }
	pinMode(btnPinNrsArray[0], INPUT_PULLUP);
  writeLCDMessage();
}


// main loop for reading buttons' actions
void loop() {
  // default 1 means HIGH and 0 means LOW, so I use ! to convert
  int newShouldLightOn = !digitalRead(redBtnPin);

	// eliminate blinking & catch change
  if (shouldLightOn != newShouldLightOn) {
    shouldLightOn = newShouldLightOn;
  }
  for(int i = 0; i < amountOfPinsUsed; i++) {
    x = i;
    diodePulseToggle();
    //if (shouldResetSecondRow()) lcdRowReset(1);
	}
}



// switch the light of a diode
// write status on the LCD
void diodePulseToggle() {
  //currentMillis = millis();

  int ledPinNr = ledPinNrsArray[x];
	int ledState = shouldLightOn;

	// eliminate blinking & catch change
  if(ledState != ledStates[x]){
    digitalWrite(ledPinNr, ledState);
    //lcdRowReset(1);
    ledStates[x] = ledState;
    //previousMillis = currentMillis;
    if ( ledPinNr == relayPin ) {
      relayState = digitalRead(relayPin);
      writeLCDMessage();
    }
  }
	//delay(2000);
}


// set cursor below the initially written "Light status "
// and write status of the specific diode
void writeLCDMessage() {
	lcd.setCursor(LCD_2_ROW_START_COL, 1);
	/*for(int i = 0; i < String(pinColorsPL[x]).length(); i++){
		char currLetter = pinColorsPL[x][i];
		lcd.setCursor(LCD_2_ROW_START_COL + i, 1);

		if (currLetter == "ł") {
			lcd.write(byte(0));
		} else if (currLetter == "ó") {
			lcd.write(byte(1));
		} else if (currLetter == "ż") {
			lcd.write(byte(2));
		} else {
			lcd.print(pinColorsPL[x][2]);
		}
	}*/  
  writeLCDRelayState();

  String stringToPrint = String("Przekaźnik: ");
        stringToPrint += (relayState ? "za" : "wy") + String("łączony");
  Serial.println(stringToPrint);
	//lcd.print(stringToPrint);
}


// return a boolean saying whether to reset the 2nd row
// if a second has passed and the text is still visible on the LCD
/*bool shouldResetSecondRow(){
  if (!ledStates[x] && lastLight == x) {
    int millisDifference = currentMillis-previousMillis;
    return millisDifference >= interval;
  } else {
    return false;
  }
}*/


void writeLCDRelayState() {
// check if relay pin is on
  if(relayState) {
    lcd.print("za");
  } else {
    lcd.print("wy");
  }
  lcd.write(byte(1));
  lcd.write(byte(0));
  lcd.print("czony");
}


void lcdRowReset(int rowNr) {
	lcd.setCursor(0, rowNr);
	lcd.print("                ");
}


void createSpecialCharacters() {
	// maximum is 0 - 7
  // reset character to avoid problem
  // with displaying letters
  // after e.g. changing their index nr
	lcd.createChar(0, resetCharacter);
	lcd.createChar(0, a_);

	//lcd.createChar(, resetCharacter);
	//lcd.createChar(, c_);

	//lcd.createChar(, resetCharacter);
	//lcd.createChar(, e_);

	lcd.createChar(1, resetCharacter);
	lcd.createChar(1, l_);

	//lcd.createChar(, resetCharacter);
	//lcd.createChar(, n_);

	lcd.createChar(2, resetCharacter);
	lcd.createChar(2, o_);

	//lcd.createChar(, resetCharacter);
	//lcd.createChar(, s_);

	lcd.createChar(4, resetCharacter);
	lcd.createChar(4, z__);

	//lcd.createChar(2, resetCharacter);
	//lcd.createChar(2, z_);

	lcd.createChar(3, resetCharacter);
	lcd.createChar(3, heartSymbol);
  
  //lcd.write(byte(0));
  //lcd.write(byte(1));
  //lcd.write(byte(2));
  //lcd.write(byte(3));
  //lcd.write(byte(4));
  //lcd.write(byte(5));
  //lcd.write(byte(6));
  //lcd.write(byte(7));
}