#include <DHT.h>
const int dhtPin = 26;
DHT dht(dhtPin, DHT22);
void setup() {
  dht.begin();
  Serial.begin(115200);
  Serial.println("Hello, ESP32!");
}

void loop() {
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();
  Serial.print("Temperature Sent is:");
  Serial.print(temperature);
  Serial.print("⁰C\t");
  Serial.print("Humidity Sent is:");
  Serial.print(humidity);
  Serial.println(" %");
  delay(10); // this speeds up the simulation
}