#include <DHTesp.h>
#include <LiquidCrystal_I2C.h>

const int DHT_PIN = 15;
const int blower = 2;
const int heater = 4;

DHTesp dhtSensor;
LiquidCrystal_I2C lcd(0x27, 16, 2);

void sendSensor()
{
  TempAndHumidity data = dhtSensor.getTempAndHumidity();
  int temperature = data.temperature;
  int humidity = data.humidity;

  lcd.setCursor(8, 0);
  lcd.print(temperature);
  lcd.setCursor(8, 1);
  lcd.print(humidity);

  
  if (temperature > 40 && humidity < 30)
  {
    
    digitalWrite(blower, HIGH);
    digitalWrite(heater, LOW);
    lcd.setCursor(0, 0);
    lcd.print("Pendingin Hidup");
    lcd.setCursor(0, 1);
    lcd.print("Menurunkan Suhu");
  }
  else if (temperature < 30 && humidity > 70)
  {
    
    digitalWrite(blower, LOW);
    digitalWrite(heater, HIGH);
    lcd.setCursor(0, 0);
    lcd.print("Penghangat Hidup");
    lcd.setCursor(0, 1);
    lcd.print("Meningkatkan Suhu");
  }
  else
  {
    
    digitalWrite(blower, LOW);
    digitalWrite(heater, LOW);
    lcd.setCursor(0, 0);
    lcd.print("Suhu Stabil");
    lcd.setCursor(0, 1);
    lcd.print("Mempertahankan Suhu");
  }
}

void setup()
{
  pinMode(blower, OUTPUT);
  pinMode(heater, OUTPUT);

  lcd.init();
  lcd.backlight();
  lcd.setCursor(0, 0);
  lcd.print("Suhu = ");
  lcd.setCursor(0, 1);
  lcd.print("Humi = ");

  dhtSensor.setup(DHT_PIN, DHTesp::DHT22);
  Serial.begin(115200);
  delay(1000);
}

void loop()
{
  sendSensor();
  delay(1000); 
}