#include "DHTesp.h"

#define DHT_PIN 15
#define TRIG_PIN 13
#define ECHO_PIN 14

DHTesp dhtSensor;

const float kecCahaya =  0.034;

void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  Serial.println("Hello, ESP32!");
  dhtSensor.setup(DHT_PIN, DHTesp::DHT22);

  pinMode(TRIG_PIN, OUTPUT);
  pinMode(ECHO_PIN, INPUT);
}

void loop() {
  // put your main code here, to run repeatedly:
  TempAndHumidity data = dhtSensor.getTempAndHumidity();
  Serial.println("Temp: " + String(data.temperature, 2) + "C");
  Serial.println("Humidity: " + String(data.humidity, 1) + "%");
  Serial.println("---");
  delay(1000); // this speeds up the simulation

  digitalWrite(TRIG_PIN, HIGH);
  delayMicroseconds(10);
  digitalWrite(TRIG_PIN, LOW);

  int duration = pulseIn(ECHO_PIN, HIGH);
  float jarak = duration * kecCahaya / 2;
  Serial.println("Nilai Jarak (cm): ");
  Serial.println(jarak);
  delay(1000);
}