#include <FlowSensor.h>
#include <FlowSensor_Type.h>
#include <Wire.h>                 
#include <rgb_lcd.h>    

rgb_lcd lcd;

FlowSensor::FlowSensor(uint16_t type ,uint8_t 2);

void setup()
{
  Serial.begin(9600);
  lcd.begin(16, 2);
}

void loop() 
{
  //float flowrate = 
  Serial.print("Flow rate: ");
  Serial.print(flowrate);
  Serial.println(" L/min");

  lcd.setCursor(0, 0);  // Aller à la première ligne
  lcd.print("Flow rate: ");
  lcd.print(flowrate);
  lcd.print(" L/min");
  delay(1000);// Attendre 1 seconde avant la prochaine lecture
}