// Complete Instructions: https://RandomNerdTutorials.com/esp32-digital-inputs-outputs-arduino/

// set pin numbers
//const int buttonPin = 4;  // the number of the pushbutton pin
const int a =  22;
const int b = 21;
const int c = 19;
const int d = 18;
const int e = 5;
const int f = 17;
const int g = 4;
const int dp = 2;   // the number of the LED pin

// variable for storing the pushbutton status 
//int buttonState = 0;

void setup() {
  Serial.begin(115200);  
  // initialize the pushbutton pin as an input
  //pinMode(buttonPin, INPUT);
  // initialize the LED pin as an output
  pinMode(a, OUTPUT);
  pinMode(b, OUTPUT);
  pinMode(c, OUTPUT);
  pinMode(d, OUTPUT);
  pinMode(e, OUTPUT);
  pinMode(f, OUTPUT);
  pinMode(g, OUTPUT);
  pinMode(dp, OUTPUT);
}

void loop() {

  timer10s();
  // read the state of the pushbutton value
  //buttonState = digitalRead(buttonPin);
  //Serial.println(buttonState);
  // check if the pushbutton is pressed.
  // if it is, the buttonState is HIGH
  //if (buttonState == HIGH) {
    // turn LED on


    //Serial.println("9");
    //delay(1000);

    //digitalWrite(a, HIGH);
    //digitalWrite(b, HIGH);
    //digitalWrite(c, HIGH);
    //digitalWrite(d, HIGH);
    //digitalWrite(e, HIGH);
    //digitalWrite(f, HIGH);
    //digitalWrite(g, HIGH);
    //Serial.println("8");
    //delay(1000);

    //digitalWrite(a, HIGH);
    //digitalWrite(b, HIGH);
    //digitalWrite(c, HIGH);
    //digitalWrite(d, LOW);
    //digitalWrite(e, LOW);
    //digitalWrite(f, LOW);
    //digitalWrite(g, LOW);
    //Serial.println("7");
    //delay(1000);

    //digitalWrite(a, HIGH);
    //digitalWrite(b, LOW);
    //digitalWrite(c, HIGH);
    //digitalWrite(d, HIGH);
    //digitalWrite(e, HIGH);
    //digitalWrite(f, HIGH);
    //digitalWrite(g, HIGH);
    //Serial.println("6");
    //delay(1000);

    //digitalWrite(a, HIGH);
    //digitalWrite(b, LOW);
    //digitalWrite(c, HIGH);
    //digitalWrite(d, HIGH);
    //digitalWrite(e, LOW);
    //digitalWrite(f, HIGH);
    //digitalWrite(g, HIGH);
    //Serial.println("5");
    //delay(1000);


  
    //digitalWrite(a, LOW);
    //digitalWrite(b, LOW);
    //digitalWrite(c, LOW);
    //digitalWrite(d, LOW);
    //digitalWrite(e, LOW);
    //digitalWrite(f, LOW);
    //digitalWrite(g, LOW);
    //digitalWrite(dp, LOW);
    //Serial.println("");
    //delay(1000);
   

  //}
}
void timer10s() {
      //Serial.println("9");
    //delay(1000);

    digitalWrite(a, HIGH);
    digitalWrite(b, HIGH);
    digitalWrite(c, HIGH);
    digitalWrite(d, HIGH);
    digitalWrite(e, LOW);
    digitalWrite(f, HIGH);
    digitalWrite(g, HIGH);
    Serial.println("9");
    delay(1000);

    digitalWrite(a, HIGH);
    digitalWrite(b, HIGH);
    digitalWrite(c, HIGH);
    digitalWrite(d, HIGH);
    digitalWrite(e, HIGH);
    digitalWrite(f, HIGH);
    digitalWrite(g, HIGH);
    Serial.println("8");
    delay(1000);

    digitalWrite(a, HIGH);
    digitalWrite(b, HIGH);
    digitalWrite(c, HIGH);
    digitalWrite(d, LOW);
    digitalWrite(e, LOW);
    digitalWrite(f, LOW);
    digitalWrite(g, LOW);
    Serial.println("7");
    delay(1000);

    digitalWrite(a, HIGH);
    digitalWrite(b, LOW);
    digitalWrite(c, HIGH);
    digitalWrite(d, HIGH);
    digitalWrite(e, HIGH);
    digitalWrite(f, HIGH);
    digitalWrite(g, HIGH);
    Serial.println("6");
    delay(1000);

    digitalWrite(a, HIGH);
    digitalWrite(b, LOW);
    digitalWrite(c, HIGH);
    digitalWrite(d, HIGH);
    digitalWrite(e, LOW);
    digitalWrite(f, HIGH);
    digitalWrite(g, HIGH);
    Serial.println("5");
    delay(1000);


    digitalWrite(a, LOW);
    digitalWrite(b, HIGH);
    digitalWrite(c, HIGH);
    digitalWrite(d, LOW);
    digitalWrite(e, LOW);
    digitalWrite(f, HIGH);
    digitalWrite(g, HIGH);
    Serial.println("4");
    delay(1000);


    digitalWrite(a, HIGH);
    digitalWrite(b, HIGH);
    digitalWrite(c, HIGH);
    digitalWrite(d, HIGH);
    digitalWrite(e, LOW);
    digitalWrite(f, LOW);
    digitalWrite(g, HIGH);
    Serial.println("3");
    delay(1000);


    digitalWrite(a, HIGH);
    digitalWrite(b, HIGH);
    digitalWrite(c, LOW);
    digitalWrite(d, HIGH);
    digitalWrite(e, HIGH);
    digitalWrite(f, LOW);
    digitalWrite(g, HIGH);
    Serial.println("2");
    delay(1000);


    digitalWrite(a, LOW);
    digitalWrite(b, HIGH);
    digitalWrite(c, HIGH);
    digitalWrite(d, LOW);
    digitalWrite(e, LOW);
    digitalWrite(f, LOW);
    digitalWrite(g, LOW);
    Serial.println("1");
    delay(1000);


    digitalWrite(a, HIGH);
    digitalWrite(b, HIGH);
    digitalWrite(c, HIGH);
    digitalWrite(d, HIGH);
    digitalWrite(e, HIGH);
    digitalWrite(f, HIGH);
    digitalWrite(g, LOW);
    Serial.println("0");
    delay(1000);
}