#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <DHT.h>

#define SCREEN_WIDTH 128
#define SCREEN_HEIGHT 64
#define OLED_RESET -1

Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

#define DHT_PIN 5
#define DHT_TYPE DHT22

DHT dht(DHT_PIN, DHT_TYPE);

void setup() {
Serial.begin(9600);
delay(100);


if(!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) {
Serial.println(F("SSD1306 allocation failed"));
for(;;);
}

display.display();
delay(2000);
display.clearDisplay(); //


dht.begin();
}

void loop() {

float temperature = dht.readTemperature();
float humidity = dht.readHumidity();

Serial.print("Temperature: ");
Serial.print(temperature);
Serial.print("°C | Humidity: ");
Serial.print(humidity);
Serial.println("%");


display.clearDisplay();


display.setTextSize(2);
display.setTextColor(SSD1306_WHITE);
display.setCursor(0, 0);
display.print("Temperature: ");
display.print(temperature);
display.println("C");
display.print("Humidity: ");
display.print(humidity);
display.println("%");


display.display();

while(1);
}