#include <IRremote.h>
int RECV_PIN = 11;
int LED1 = 6;
int LED2 = 5;
int LED3 = 4;
int LED4 = 3;



void setup() {
  // put your setup code here, to run once:
  pinMode(LED1, OUTPUT);
  pinMode(LED2, OUTPUT);
  pinMode(LED3, OUTPUT);
  pinMode(LED4, OUTPUT);
  IrReceiver.begin(RECV_PIN);
  Serial.begin(9600);
}

void loop() {
  // put your main code here, to run repeatedly:
  if(IrReceiver.decode()){
    IrReceiver.printIRResultShort(&Serial);
    switch (IrReceiver.decodedIRData.decodedRawData){
      case 0xCF30FF00:
      digitalWrite(LED1, HIGH);
      break;
      case 0xE718FF00:
      digitalWrite(LED1, LOW);
      break;
      case 0x857AFF00:
      digitalWrite(LED2, HIGH);
      break;
      case 0xEF10FF00:
      digitalWrite(LED2, LOW);
      break;
      case 0xC738FF00:
      digitalWrite(LED3, HIGH);
      break;
      case 0xA55AFF00:
      digitalWrite(LED3, LOW);
      break;
      case 0xBD42FF00:
      digitalWrite(LED4, HIGH);
      break;
      case 0xB54AFF00:
      digitalWrite(LED4, LOW);
      break;
      case 0x9768FF00:
      digitalWrite(LED1, LOW);
      digitalWrite(LED2, LOW);
      digitalWrite(LED3, LOW);
      digitalWrite(LED4, LOW);
      break;
      case 0x5DA2FF00:
      digitalWrite(LED1, HIGH);
      digitalWrite(LED2, HIGH);
      digitalWrite(LED3, HIGH);
      digitalWrite(LED4, HIGH);
      break;

    }
    IrReceiver.resume();
  }


}