#define BLYNK_TEMPLATE_ID "TMPL6dSaRNTjl"
#define BLYNK_TEMPLATE_NAME "Monitoring Suhu"
#define BLYNK_AUTH_TOKEN "pFzCfzcbPIwsJSxRtAs5gvRXccOhm2bZ"

#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>
#include <LiquidCrystal_I2C.h>
#include <DHT.h>
#define DHTPIN 12
#define DHTTYPE DHT22
DHT dht(DHTPIN, DHT22);

char auth[] = "pFzCfzcbPIwsJSxRtAs5gvRXccOhm2bZ";
char ssid[] = "Wokwi-GUEST";
char pass[] = "";

BlynkTimer timer;

LiquidCrystal_I2C lcd(0x27,16,2);
int chk;
float h;
float t;

void setup() {
  Serial.begin(115200);
  Serial.println("Sistem Monitoring Suhu");
  dht.begin();
  Blynk.begin(auth, ssid, pass);
  lcd.init();
  lcd.backlight();
  lcd.setCursor(1,0);//Setelah 3 pixel dari kiri, baris ke 1
  lcd.print("Papan Informasi");
  lcd.setCursor(1,1);//Setelah 2 pixel dari kiri, baris ke 2
  lcd.print("Suhu & Kelembaban");
  delay(1000);
  lcd.clear();
  
}

void loop() {
 
 h = dht.readHumidity();
 t = dht.readTemperature();

 Blynk.virtualWrite(V0,t);
  Blynk.virtualWrite(V1,h);

  Serial.println(("Suhu = "));;
  Serial.print(t);
  Serial.println("Kelembapan = ");;
  Serial.print(h);

 lcd.setCursor(0, 0);
 lcd.print("Temperatur");
 lcd.setCursor(0, 1);
 lcd.print(t);
 lcd.setCursor(5, 1);
 lcd.print("C");
 delay(3000);
 lcd.clear();

 lcd.setCursor(0, 0);
 lcd.print("Kelembapan");
 lcd.setCursor(0, 1);
 lcd.print(h);
 lcd.setCursor(5, 1);
 lcd.print("%");
 delay(2000);
 lcd.clear();

 lcd.setCursor(5, 0);
 lcd.print("Sukses");
 lcd.setCursor(6, 1);
 lcd.print("Yeay");
 delay(2000);
 lcd.clear();
 
}