#ifdef ESP8266
  #include <ESP8266WiFi.h>  // Built-in for ESP8266
#else
  #include <WiFi.h>         // Built-in for ESP32
#endif

#include "time.h" 

// Change to your WiFi credentials and select your time zone
const char* ssid     = "Wokwi-GUEST";
const char* password = "";
//const char* Timezone = "GMT0BST,M3.5.0/01,M10.5.0/02";       // UK

//Example time zones
//const char* Timezone = "GMT0BST,M3.5.0/01,M10.5.0/02";     // UK
//const char* Timezone = "MET-2METDST,M3.5.0/01,M10.5.0/02"; // Most of Europe
const char* Timezone = "CET-1CEST,M3.5.0,M10.5.0/3";       // Central Europe
//const char* Timezone = "EST-2METDST,M3.5.0/01,M10.5.0/02"; // Most of Europe
//const char* Timezone = "EST5EDT,M3.2.0,M11.1.0";           // EST USA  
//const char* Timezone = "CST6CDT,M3.2.0,M11.1.0";           // CST USA
//const char* Timezone = "MST7MDT,M4.1.0,M10.5.0";           // MST USA
//const char* Timezone = "NZST-12NZDT,M9.5.0,M4.1.0/3";      // Auckland
//const char* Timezone = "EET-2EEST,M3.5.5/0,M10.5.5/0";     // Asia
//const char* Timezone = "ACST-9:30ACDT,M10.1.0,M4.1.0/3":   // Australia

String Date_str, Time_str, Time_format;
int say=0;
void setup() {
  Serial.begin(115200);
  Serial.println("++++++++++++++++++++++++");
  Serial.println(WiFi.status() != WL_CONNECTED);
Serial.println("++++++++++++++++++++++++");
  StartWiFi();
    Serial.println("------------------------------------------");
  Serial.println(WiFi.status() != WL_CONNECTED);
Serial.println("-----------------------------------------------");
  configTime(10800, 0, "pool.ntp.org", "time.nist.gov");
 // setenv("TZ", Timezone, 1);
 // Time_format = "M"; // or StartTime("I"); for Imperial 12:00 PM format and Date format MM-DD-CCYY e.g. 12:30PM 31-Mar-2019
}

void loop() {
  UpdateLocalTime();
  Serial.println("xxxxxxxxxxxxxxxxxx");
  Serial.println(Date_str);
  Serial.println("xxxxxxxxxxxxxxxxxx");
  Serial.println("////////////////////");
  Serial.println(Time_str);
  Serial.println("////////////////////");
  Serial.println("**************************");
   Serial.println(" ");
  Serial.print("say :");
  Serial.print(say);
  Serial.println(" ");
say++;
if(say==60){

  WiFi.disconnect(true);
  WiFi.mode(WIFI_OFF);
  Serial.println("WiFi disconnected");
  Serial.flush();

}
if(say==120){
 Serial.print("Connecting WiFi...");
  WiFi.begin(ssid, password);




}
if(WiFi.status() == WL_CONNECTED){
Serial.print ( "WiFi bağlı.." );


}else{

Serial.print ( "bağlı değil!.." );

}


  delay(1000);
}

//#########################################################################################
void UpdateLocalTime(){
  time_t now;
  time(&now);
  //See http://www.cplusplus.com/reference/ctime/strftime/
  char hour_output[30], day_output[30];
  
    strftime(day_output, 30, "%a  %d-%m-%y", localtime(&now)); // Formats date as: Sat 24-Jun-17
    strftime(hour_output, 30, "%T", localtime(&now));    // Formats time as: 14:05:49
 
  Date_str = day_output;
  Time_str = hour_output;
}
//#########################################################################################
void StartWiFi(){
 /* Set the ESP to be a WiFi-client, otherwise by default, it acts as ss both a client and an access-point
  *  and can cause network-issues with other WiFi-devices on your WiFi-network. */
  WiFi.mode(WIFI_STA);
  Serial.print(F("\r\nConnecting to: ")); Serial.println(String(ssid));
  WiFi.begin(ssid, password);
  /*
  while (WiFi.status() != WL_CONNECTED ) { delay(500); Serial.print(F(".")); }
*/
  Serial.println("WiFi connected to address: "+String(WiFi.localIP()));


}