/*************************************************************

  This is a simple demo of sending and receiving some data.
  Be sure to check out other examples!
 *************************************************************/

/* Fill-in information from Blynk Device Info here */
#define BLYNK_TEMPLATE_ID           "TMPL6pCFinFi2"
#define BLYNK_TEMPLATE_NAME         "Quickstart Template"
#define BLYNK_AUTH_TOKEN            "Bi6JGGXzUQveQV5wuEA9a9OB8XKxKNe1"

/* Comment this out to disable prints and save space */
#define BLYNK_PRINT Serial


#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "Wokwi-GUEST";
char pass[] = "";

BlynkTimer timer;

// This function is called every time the Virtual Pin 0 state changes
BLYNK_WRITE(V0){
  digitalWrite(13, param.asInt());
}
 
// This function is called every time the device is connected to the Blynk.Cloud
BLYNK_CONNECTED()
{
  // Change Web Link Button message to "Congratulations!"
  Blynk.setProperty(V3, "offImageUrl", "https://static-image.nyc3.cdn.digitaloceanspaces.com/general/fte/congratulations.png");
  Blynk.setProperty(V3, "onImageUrl",  "https://static-image.nyc3.cdn.digitaloceanspaces.com/general/fte/congratulations_pressed.png");
  Blynk.setProperty(V3, "url", "https://docs.blynk.io/en/getting-started/what-do-i-need-to-blynk/how-quickstart-device-was-made");
}

// This function sends Arduino's uptime every second to Virtual Pin 2.
void myTimerEvent()
{
  // You can send any value at any time.
  // Please don't send more that 10 values per second.
}
  int SensorPir = 14;
  int RelayPin  = 13;
  int Val       = 0;
  int PirState  = LOW;

void setup()
{
  pinMode(SensorPir,INPUT);
  pinMode(RelayPin,OUTPUT);
  // Debug console
  Serial.begin(115200);

  Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass);
  // You can also specify server:
  //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, "blynk.cloud", 80);
  //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, IPAddress(192,168,1,100), 8080);

  // Setup a function to be called every second
  timer.setInterval(1000L, myTimerEvent);
}

void loop(){
  
  Val = digitalRead(SensorPir);

  if (Val == HIGH) { 
    digitalWrite(RelayPin, HIGH);            
    if (PirState == LOW) {
      
      Blynk.logEvent("notif","Gerakan Terdeteksi");
      PirState = HIGH;
    }
  } else {
    if (PirState == HIGH) {
      digitalWrite(RelayPin, LOW); 
      
      Blynk.logEvent("notif","Tidak Ada Gaerakan");
      PirState = LOW;
    }
    delay(200);
  }
  Blynk.run();
  timer.run();
}