void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
 
}

void loop() {
  // put your main code here, to run repeatedly:
   pinMode(12, OUTPUT);
  digitalWrite(12, HIGH);
  delay(10);
  digitalWrite(12, LOW);
  delay(10);
   pinMode(14, OUTPUT);
  digitalWrite(14, HIGH);
  delay(10);
  digitalWrite(14, LOW);
  delay(10);
   pinMode(27, OUTPUT);
  digitalWrite(27, HIGH);
  delay(10);
  digitalWrite(27, LOW);
  delay(10);
   pinMode(26, OUTPUT);
  digitalWrite(26, HIGH);
  delay(10);
  digitalWrite(26, LOW);
  delay(10);
   pinMode(25, OUTPUT);
  digitalWrite(25, HIGH);
  delay(10);
  digitalWrite(25, LOW);
  delay(10);
   pinMode(33, OUTPUT);
  digitalWrite(33, HIGH);
  delay(10);
  digitalWrite(33, LOW);
  delay(10);
   pinMode(32, OUTPUT);
  digitalWrite(32, HIGH);
  delay(10);
  digitalWrite(32, LOW);
  delay(10);
   pinMode(13, OUTPUT);
  digitalWrite(13, HIGH);
  delay(10);
  digitalWrite(13, LOW);
  delay(10);
   pinMode(23, OUTPUT);
  digitalWrite(23, HIGH);
  delay(10);
  digitalWrite(23, LOW);
  delay(10);
   pinMode(22, OUTPUT);
  digitalWrite(22, HIGH);
  delay(10);
  digitalWrite(22, LOW);
  delay(10);
   pinMode(21, OUTPUT);
  digitalWrite(21, HIGH);
  delay(10);
  digitalWrite(21, LOW);
  delay(10);
   pinMode(19, OUTPUT);
  digitalWrite(19, HIGH);
  delay(10);
  digitalWrite(19, LOW);
  delay(10);
   pinMode(18, OUTPUT);
  digitalWrite(18, HIGH);
  delay(10);
  digitalWrite(18, LOW);
  delay(10);
   pinMode(5, OUTPUT);
  digitalWrite(5, HIGH);
  delay(10);
  digitalWrite(5, LOW);
  delay(10);
   pinMode(17, OUTPUT);
  digitalWrite(17, HIGH);
  delay(10);
  digitalWrite(17, LOW);
  delay(10);
   pinMode(16, OUTPUT);
  digitalWrite(16, HIGH);
  delay(10);
  digitalWrite(16, LOW);
  delay(10);
   pinMode(4, OUTPUT);
  digitalWrite(4, HIGH);
  delay(10);
  digitalWrite(4, LOW);
  delay(10);
   pinMode(0, OUTPUT);
  digitalWrite(0, HIGH);
  delay(10);
  digitalWrite(0, LOW);
  delay(10);
   pinMode(2, OUTPUT);
  digitalWrite(2, HIGH);
  delay(10);
  digitalWrite(2, LOW);
  delay(10);
   pinMode(15, OUTPUT);
  digitalWrite(15, HIGH);
  delay(10);
  digitalWrite(15, LOW);
  delay(10);
// this speeds up the simulation
}