void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  // Serial.println("Restu Amrilani Fitrah Santika");
  pinMode(26, OUTPUT);
  pinMode(27, OUTPUT);
  pinMode(14, OUTPUT);
  pinMode(17, OUTPUT);
  pinMode(18, OUTPUT);
  pinMode(19, OUTPUT);
}

void loop() {
  // put your main code here, to run repeatedly:
  // Serial.println("Restu Amrilani Fitrah Santika");
  digitalWrite(26, HIGH);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(26));
  digitalWrite(27, HIGH);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(27));
  digitalWrite(14, HIGH);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(14));
  delay(1000);

  digitalWrite(26, LOW);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(26));
  digitalWrite(27, LOW);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(27));
  digitalWrite(14, LOW);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(14));

  digitalWrite(19, HIGH);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(19));
  digitalWrite(18, HIGH);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(18));
  digitalWrite(17, HIGH);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(17));
  delay(1000);

  digitalWrite(19, LOW);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(19));
  digitalWrite(18, LOW);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(18));
  digitalWrite(17, LOW);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(17));
}