void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  // Serial.println("Restu Amrilani Fitrah Santika");
  pinMode(2, OUTPUT);
  pinMode(0, OUTPUT);
  pinMode(4, OUTPUT);
  pinMode(16, OUTPUT);
  // pinMode(12, OUTPUT);
}

void loop() {
  // put your main code here, to run repeatedly:
  // Serial.println("Restu Amrilani Fitrah Santika");
  digitalWrite(2, HIGH);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(2));
  delay(1000);
  digitalWrite(2, LOW);
  Serial.print("Nilai Lampu= "); // menampilkan kata
  Serial.println(digitalRead(2)); // menampilkan simpanan kata
  delay(1000);

  digitalWrite(0, HIGH);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(0));
  delay(1000);
  digitalWrite(0, LOW);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(0));
  delay(1000);

  digitalWrite(4, HIGH);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(4));
  delay(1000);
  digitalWrite(4, LOW);
  Serial.print("Nilai Lampu= ");
  Serial.println(digitalRead(4));
  delay(1000);

  digitalWrite(16, HIGH);
  delay(1000); // this speeds up the simulation
  digitalWrite(16, LOW);
  delay(1000);
  Serial.print("Nilai Lampu= "); // menampilkan kata
  Serial.println(digitalRead(16)); // menampilkan simpanan kata
  delay(1000);
  
  // digitalWrite(12, HIGH);
  // delay(1000); // this speeds up the simulation
  // digitalWrite(12, LOW);
  // delay(1000);

  // IF-ELSE
  // if ()
}