int btn = 13;
int led1 = 27;
int led2 = 14;
int led3 =12;
void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  Serial.println("Haay.Bang.Billyyy");
  pinMode(13, INPUT);
  pinMode(27, OUTPUT);
  digitalWrite(27, LOW);
  pinMode(14, OUTPUT);
  digitalWrite(14, LOW);
  pinMode(12,OUTPUT);
  digitalWrite(12, LOW);
  delay(10);
}

void loop() {
  // ATAS KE BAWAH
  int status = digitalRead(13);
  if (status == HIGH){
   pinMode(27, OUTPUT);
  digitalWrite(27, HIGH);
  delay(100);
  digitalWrite(27, LOW);
  delay(100);
  pinMode(14, OUTPUT);
  digitalWrite(14, HIGH);
  delay(100);
  digitalWrite(14, LOW);
  delay(100);
  pinMode(12,OUTPUT);
  digitalWrite(12, HIGH);
  delay(100);
  digitalWrite(12, LOW);
  delay(100);
  
   // BAWAH KE ATAS
   pinMode(12, OUTPUT);
  digitalWrite(12, HIGH);
  delay(100);
  digitalWrite(12, LOW);
  delay(100);
  pinMode(14, OUTPUT);
  digitalWrite(14, HIGH);
  delay(100);
  digitalWrite(14, LOW);
  delay(100);
  pinMode(27,OUTPUT);
  digitalWrite(27, HIGH);
  delay(100);
  digitalWrite(27, LOW);
  delay(100);
  // NYALA BARENG
  pinMode(27, OUTPUT);
  digitalWrite(27, HIGH);
  delay(100);
  pinMode(14, OUTPUT);
  digitalWrite(14, HIGH);
  delay(100);
  pinMode(12,OUTPUT);
  digitalWrite(12, HIGH);
  delay(100);
  digitalWrite(27, LOW);
  delay(100);
  digitalWrite(14, LOW);
  delay(100);
  digitalWrite(12, LOW);
  delay(100);
  // NYALA BARENG
pinMode(27, OUTPUT);
  digitalWrite(27, HIGH);
  delay(100);
  pinMode(14, OUTPUT);
  digitalWrite(14, HIGH);
  delay(100);
  pinMode(12,OUTPUT);
  digitalWrite(12, HIGH);
  delay(100);
  digitalWrite(27, LOW);
  delay(100);
  digitalWrite(14, LOW);
  delay(100);
  digitalWrite(12, LOW);
  delay(100);
  
// NYALA BARENG
pinMode(27, OUTPUT);
  digitalWrite(27, HIGH);
  delay(100);
  pinMode(14, OUTPUT);
  digitalWrite(14, HIGH);
  delay(100);
  pinMode(12,OUTPUT);
  digitalWrite(12, HIGH);
  delay(100);
  digitalWrite(27, LOW);
  delay(100);
  digitalWrite(14, LOW);
  delay(100);
  digitalWrite(12, LOW);
  delay(100);}
  // Serial.println(digitalRead(13));
  // Serial.println(digitalRead(27));
  // Serial.println(digitalRead(14));
  // Serial.println(digitalRead(12));

  

}