void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  Serial.println("Raddyaarizaldy");
  pinMode(25, INPUT);
  pinMode(26, INPUT);
  pinMode(32, INPUT);
  pinMode(33, INPUT);
  pinMode(21, OUTPUT);
  pinMode(19, OUTPUT);
}

void loop() {
  //logic and menggunakan switch
  if(digitalRead(25)==1 && digitalRead(26)==1){
    digitalWrite(19, HIGH);
  }
  else {
    digitalWrite(19, LOW);
  }
  delay(300);
  
//logic or menggunakan push button
// if (digitalRead(32)==1 || digitalRead(33)==1){
//   digitalWrite(21, HIGH);
// }
// else{
//   digitalWrite(21, LOW);
// }
// delay(300);

//logic or dengan statement not (!=) menggunakan push button
if (digitalRead(32)!=digitalRead(33) || digitalRead(32)==1&&digitalRead(33)==1){
  digitalWrite(21, HIGH);
}
else{
  digitalWrite(21, LOW);
}
delay(300);

Serial.print("button kanan = ");Serial.println(digitalRead(32));
Serial.print("button kiri = ");Serial.println(digitalRead(33));
Serial.print("switch kanan = ");Serial.println(digitalRead(25));
Serial.print("switch kiri = ");Serial.println(digitalRead(26));
delay(1000);
}