#include <LiquidCrystal_I2C.h>
#include <DallasTemperature.h>
#include <OneWire.h>
#include <Keypad.h>

#define motor 2
#define botao 18

#define TRIG_PIN2 13
#define ECHO_PIN2 12
#define ledverde2 9
#define ledama2   10
#define ledverm2 11
#define TRIG_PIN1 15
#define ECHO_PIN1 14
#define ledverde1 3
#define ledama1   4
#define ledverm1  5
#define TRIG_PIN3 17
#define ECHO_PIN3 16
#define ledverde3 6
#define ledama3   7
#define ledverm3  8

LiquidCrystal_I2C lcd(0X27, 20, 4);

OneWire oneWire(24);
DallasTemperature sensor(&oneWire);

#define I2C_ADDR4    0x29
#define LCD_COLUMNS4 16
#define LCD_LINES4   2

float nivel1;
float nivel2;
float nivel3;

String txt_vaz1 = "      ";
unsigned int vaz1 = 0;
uint8_t cont;

const uint8_t ROWS = 4;
const uint8_t COLS = 4;
char keys[ROWS][COLS] = {
  { '1', '2', '3', 'A' },
  { '4', '5', '6', 'B' },
  { '7', '8', '9', 'C' },
  { '*', '0', '#', 'D' }
};

uint8_t rowPins[ROWS] = { 52, 50, 48, 46 }; 
uint8_t colPins[COLS] = { 44, 42, 40, 38 }; 

Keypad keypad = Keypad(makeKeymap(keys), rowPins, colPins, ROWS, COLS);
  
  //byte rowpin[rows] = { 52,50,48,46};
  //byte colpin[cols] = {44,42,40,38};
  
  LiquidCrystal_I2C lcd4(I2C_ADDR4, LCD_COLUMNS4, LCD_LINES4);
  
void Lerdistancia1CM(void) 
{
    digitalWrite(TRIG_PIN1, LOW);
    delayMicroseconds(2);
    digitalWrite(TRIG_PIN1, HIGH);
    delayMicroseconds(2);
    digitalWrite(TRIG_PIN1, LOW);
    int duration = pulseIn(ECHO_PIN1, HIGH);
    nivel1 = duration * 0.034 / 2;

    if(nivel1 >= 300){
      digitalWrite(ledverde1, HIGH); 
      digitalWrite(ledama1, LOW);
      digitalWrite(ledverm1, LOW);
      
    } else if(nivel1 >= 50 && nivel1 <= 300){
      digitalWrite(ledverde1, LOW); 
      digitalWrite(ledama1, HIGH);
      digitalWrite(ledverm1, LOW);
    } else {
      digitalWrite(ledverde1, LOW); 
      digitalWrite(ledama1, LOW);
      digitalWrite(ledverm1, HIGH);
    }
}
void Lerdistancia2CM(void) 
{
  digitalWrite(TRIG_PIN2, LOW);
  delayMicroseconds(2);
  digitalWrite(TRIG_PIN2, HIGH);
  delayMicroseconds(2);
  digitalWrite(TRIG_PIN2, LOW);
  int duration = pulseIn(ECHO_PIN2, HIGH);
  nivel2 = duration * 0.034 / 2;

  if(nivel2 >= 300){
   	digitalWrite(ledverde2, HIGH); 
    digitalWrite(ledama2, LOW);
    digitalWrite(ledverm2, LOW);
    
  } else if(nivel2 >= 50 && nivel2 <= 300){
  	digitalWrite(ledverde2, LOW); 
    digitalWrite(ledama2, HIGH);
    digitalWrite(ledverm2, LOW);
  } else {
    digitalWrite(ledverde2, LOW); 
    digitalWrite(ledama2, LOW);
    digitalWrite(ledverm2, HIGH);
  }
}
void Lerdistancia3CM(void) 
{
  digitalWrite(TRIG_PIN3, LOW);
  delayMicroseconds(2);
  digitalWrite(TRIG_PIN3, HIGH);
  delayMicroseconds(2);
  digitalWrite(TRIG_PIN3, LOW);
  int duration = pulseIn(ECHO_PIN3, HIGH);
  nivel3 = duration * 0.034 / 2;

  if(nivel3 >= 300){
   	digitalWrite(ledverde3, HIGH); 
    digitalWrite(ledama3, LOW);
    digitalWrite(ledverm3, LOW);
    
  } else if(nivel3 >= 50 && nivel3 <= 300){
  	digitalWrite(ledverde3, LOW); 
    digitalWrite(ledama3, HIGH);
    digitalWrite(ledverm3, LOW);
  } else {
    digitalWrite(ledverde3, LOW); 
    digitalWrite(ledama3, LOW);
    digitalWrite(ledverm3, HIGH);
  }
}
void Teclado(void) 
{
  digitalWrite(motor,1);
 //for(cont=0;cont<4;  )
 // {
    char key = keypad.getKey();
    if (key != NO_KEY) 
    {
      Serial.print(key);
      txt_vaz1[cont] = key;
      cont++;
      if(cont>=4)cont=0;
      //Serial.println(cont);
    }
 // }
   
    Serial.println();
    vaz1 = txt_vaz1.toInt();
    Serial.println(vaz1);
    lcd4.setCursor(0, 1);
    lcd4.print(vaz1);
    
  digitalWrite(motor,0);
  
}
  
void setup() {
  Serial.begin(115200);
  pinMode(TRIG_PIN2, OUTPUT);
  pinMode(ECHO_PIN2, INPUT);
  pinMode(ledverde2, OUTPUT);
  pinMode(ledama2, OUTPUT);
  pinMode(ledverm2, OUTPUT);

  pinMode(TRIG_PIN1, OUTPUT);
  pinMode(ECHO_PIN1, INPUT);
  pinMode(ledverde1, OUTPUT);
  pinMode(ledama1, OUTPUT);
  pinMode(ledverm1, OUTPUT);

  pinMode(TRIG_PIN3, OUTPUT);
  pinMode(ECHO_PIN3, INPUT);
  pinMode(ledverde3, OUTPUT);
  pinMode(ledama3, OUTPUT);
  pinMode(ledverm3, OUTPUT);

  pinMode(botao, INPUT_PULLUP);
  pinMode(motor, OUTPUT);

  lcd4.init();
  lcd4.backlight();
  lcd4.begin(16, 2);
  lcd4.print("Enter Number:");
}

void loop() 
{
  sensor.requestTemperatures();
  Lerdistancia1CM();
  Lerdistancia2CM();
  Lerdistancia3CM();
  Teclado();
  if(digitalRead(botao) == 0 )
  {
    digitalWrite(motor, HIGH);
    delay(10000);
    digitalWrite(motor, LOW);
  }
  
  lcd.init();
  lcd.backlight();
  lcd.setCursor(0, 0);
  lcd.print("TANQUE 1:");
  lcd.setCursor(11, 0);
  lcd.print(nivel1);
  lcd.setCursor(0, 1);
  lcd.print("TANQUE 2:");
  lcd.setCursor(11, 1);
  lcd.print(nivel2);
  lcd.setCursor(0, 2);
  lcd.print("TANQUE 3:");
  lcd.setCursor(11, 2);
  lcd.print(nivel3);
  lcd.setCursor(0, 3);
  lcd.print(F("Temp:"));
  lcd.setCursor(11, 3); 
  lcd.print(sensor.getTempCByIndex(0));
  //delay(1000);
  /*
  https://wokwi.com/projects/347175788714394195
  https://wokwi.com/projects/357382046680658945
  https://docs.wokwi.com/pt-BR/parts/wokwi-lcd1602
  */ 
}